7/16/2026 at 2:33:18 PM
Former GOES engineer here. At this point I'd almost be surprised if 19 didn't have something go wrong. We had issues on almost every other satellite. GOES-17 had the loop heat pipe anomaly(Supposedly from someone stepping on it in the cleanroom...), GOES-15 (IIRC) had a micrometeorite strike, and GOES-13 had a fuel tank anomaly right before deorbit.GOES-16 and GOES-17 are on-orbit spares, so in the extremely unlikely event of a total failure there's at least another spacecraft on-orbit ready to take up station.
That said, I have every faith in the GOES team to get to the bottom of this. They're the best, and I often wish I was back there working with them.
by dabluecaboose
7/16/2026 at 6:57:55 PM
From now on, every time I see the word "anomaly" I will assume it is an euphemism for "someone stepped on it".by Rygian
7/16/2026 at 8:50:37 PM
"Anomaly" is one of those words that, in the space industry, can mean anything from "Our payload isn't behaving as well as we're expecting" to "Someone stepped on it" to "A rock hit it"You can use it to describe literally anything that's off nominal. It's fantastic.
by dabluecaboose
7/16/2026 at 9:50:14 PM
I learned recently that it can also mean "the spacecraft exploded on the launchpad in an enormous fireball."https://www.abc.net.au/news/2026-05-29/blue-origin-rocket-ex...
by bigfatkitten
7/16/2026 at 10:20:14 PM
That's already known as "rapid unscheduled disassembly" - and happens so-often in spaceflight that it's hardly anomalous at this point.by DaiPlusPlus
7/17/2026 at 4:55:39 AM
I do love the term "lithobraking" as well.by waste_monk
7/17/2026 at 7:04:17 AM
Or it has failed catastrophically and gone under voluntary rapid disassembly to help engineers to diagnose the problem: https://www.youtube.com/watch?v=EC9icOKGJ94by bayindirh
7/17/2026 at 5:43:36 AM
I feel like we're all forgetting the most obvious root cause... "aliens"by superxpro12
7/16/2026 at 3:26:04 PM
> Supposedly from someone stepping on it in the cleanroomI would be too embarrassed to return to work if I did that.
by fishgoesblub
7/16/2026 at 4:25:54 PM
How do they track that? Is there a log book where someone has to write to?"Observed EMP555 step on loop heat pipe. Conducted visual inspection of the affected area; no damage found, pipe remains nominal."
by pooloo
7/16/2026 at 4:57:20 PM
I'm sure they take detailed close out photos and likely video of the entire handling process.by robszumski
7/16/2026 at 7:16:25 PM
“Measurements taking of the person: foot and shoe weight, total weight including clothing, height and leg length, estimated velocity of travel at time, estimated duration of load”by altairprime
7/17/2026 at 3:07:34 AM
Since it went into space with the stepped-on part, clearly nobody DID write it up.They really don't care. If the satellite blows up or fails, they get to build another.
by KennyBlanken
7/17/2026 at 3:48:58 AM
I didn't but that's the case. More likely there was a limited chance to evaluate the issue and something like they had a limited time launch window, no replacement ready and it tested good. "Just put a little butter on it, it's fine".by Alive-in-2025
7/19/2026 at 6:24:02 PM
The independent review team concluded the issue was from FOD in the pipe and recommended a redesign. Do you have a definite citation for someone stepped on it?by NetMageSCW
7/16/2026 at 9:46:31 PM
You expect cleanrooms to be extremely controlled environments where skilled technicians and engineers very carefully handle sensitive equipment... Then someone steps on a component :Dby GTP
7/16/2026 at 10:40:02 PM
Yeah. Stuff happens.There is the famous case of dropping the NOAA N-Prime weather satellite on the ground. They were trying to turn it from vertical to horizontal and they forgot to bolt it to the adapter. Worse: multiple people signed the paperwork attesting that they verified that it was bolted down correctly. Pictures and details here: https://spaceflightnow.com/news/n0410/04noaanreport/
Or the famous “space aligator” event. There the original plan was to launch a manned space craft and an unmanned module to do a docking test between them. But the shroud protecting the target module didn’t deploy properly. If i remember it right because the man who usually assembled that part had to leave during assembly because his wife was giving birth. Someone put it together but appearantely not correctly. The half opened shroud reminded the astronauts to the jaws of an angry aligator hence the name. Pictures: https://www.nasa.gov/missions/gemini/gemini-ix/gemini-ix-cre...
Or to not only list American failures: this russian satelite launch failed spectacularly because the IMU was installed upside down. https://youtu.be/ycRVAcZC5R4?si=LRTS7sutKSp6HnGs This was designed to be impossible to do, but someone bent and forced the component to stay in place in the wrong orientation. Then someone else whose job was to check it just signed the paperwork without climbing into the location where he could have checked it.
I love these cases. Because it shows to me how even though the trappings of high-tech we are all fundamentally just occasionally lazy, occasionally distracted monkeys banging rocks together.
by krisoft
7/16/2026 at 10:59:12 PM
> multiple people signed the paperwork attesting that they verified that it was bolted down correctly.In my experience, the more people who are assigned to do something, the more those people assume that someone else did it and slack off. Of course, I've never worked on something as difficult to fix as an orbital satellite.
by fhdkweig
7/17/2026 at 5:47:03 AM
The infamous "it fell in-between the seat and the console" problem.These happen constantly. It's always important to close the loop on these and make sure someone is assigned to it directly, not left to indirectly assume.
by superxpro12
7/17/2026 at 12:44:18 PM
There was also a test of the Apollo Launch Escape System wherein an unmanned CSM was launched on a Little Joe rocket with the plan being to manually trigger the LES at a specific point in the flight. The problem was that the roll accelerometer in the Little Joe had been installed backwards, so it quickly developed a substantial roll rate once it left the ground and the resulting centrifugal force acting on the innards of the SM turned them into rapidly escaping outards. This tore the SM skin apart and satisfied the automatic abort conditions for firing the LES. The LES operated as designed, the CM was pulled free of the SM, then went on to become stable and reach successful recovery conditions. The result was determined to be a successful test of the LES and the mission did not need to be reflown.by Suzuran
7/17/2026 at 3:58:41 PM
In 1968, a team of Perkin-Elmer technicians were carrying the million dollar Copernicus space telescope mirror to the other side of the lab. They tripped over a piece of scrap lumber. Shaka, when the walls fell.by ahazred8ta
7/17/2026 at 8:41:17 PM
That's a new one for me. Do you happen to have any pointers to more info? I found a few mentions, but nothing substantial.by jsrcout
7/17/2026 at 11:37:59 PM
It was mentioned in http://www.terrydunkle.com/glass.php and in a Sky & Telescope magazine article from 1989 which explained why Perkin-Elmer began using very meticulous step by step procedure checklists after that. To prevent any major mistakes. Oh the irony.by ahazred8ta
7/17/2026 at 3:23:39 AM
> Stuff happens.> There is the famous case of dropping the NOAA N-Prime weather satellite on the ground. They were trying to turn it from vertical to horizontal and they forgot to bolt it to the adapter. Worse: multiple people signed the paperwork attesting that they verified that it was bolted down correctly.
That wasn't a case of "stuff happens." It was a case of systemic issues with defense contractor employees not doing the work they were supposed to be, cutting corners, and "not giving a shit because if it breaks the government will just order another one from us."
It was basically fraud/grift/incompetence, not "stuff happens."
> If I remember it right because the man who usually assembled that part had to leave during assembly because his wife was giving birth. Someone put it together but appearantely not correctly.
And why was the process so poorly documented only one guy could do it right?
Why didn't someone check the assembly?
Answer: defense contractor laziness and incompetence.
by KennyBlanken
7/17/2026 at 4:46:45 AM
Upside IMU is my favorite if only for the stupidity and spectacular video that resulted.by bagels
7/17/2026 at 1:30:50 AM
NOAA-19 was dropped on its side because somebody forgot to attach the bolts to the transport platform it was riding on.https://www.google.com/search?client=firefox-b-d&q=satellite...
by walrus01
7/16/2026 at 8:00:23 PM
> GOES-17 had the loop heat pipe anomaly(Supposedly from someone stepping on it in the cleanroom...)Was this reported anywhere in the news? Sounds like one of those "not even once" kind of mistakes.
by doright