alt.hn

6/27/2026 at 10:28:53 AM

Fintech Engineering Handbook

 https://w.pitula.me/fintech-engineering-handbook/

by signa11

6/27/2026 at 12:18:53 PM

I glanced, and I found this handbook shallow and - in some areas - even bad advice.

E.g. If I ever see a monetary value stored in something else than integers I'm going to run away screaming (thank you Rust decimals represented as JSON floats). It's always integers unless you have a VERY good reason to do otherwise (though exported view can be in anything, even in weird bitcoded formats).

FX exchange. Resolution of FX isn't a point-in-time thing, things like buyer rate-in-time, seller rate-in-time, agreement, agreement tolerance, agreed upon resolution timestamp come in the effect.

Immutability - that's why you want to have event sourcing everywhere that touches money:

    # Resolved stream
    A -> B -> E

    # Actual stream
    A0 -> Edit(A0, A) -> B -> C -> D -> Rollback(B) -> E
Though in the end Fintech != Fintech. I worked at Fintech where money was treated like a baggage, and in other where money was a central point of everything.

by xlii

6/27/2026 at 2:52:56 PM

What are you referring to with the integers/floats comment? The article says clearly that the rule of thumb is not to use floats and that they’re “almost never” a good idea, that they cause unpredictable precision loss, and recommends integer or BigDecimal types in multiple places. Are you also talking about rationals? So what is the bad advice here, exactly?

For FX, it seems like you’re reinforcing what the handbook says, that there’s no canonical rate. Aside from that, it’s talking about post-resolution records and you’re talking about how to resolve, no? That’s valid nuance of a separate goal, and it’s a fine goal of yours, but doesn’t seem like a demonstration of something missing or wrong.

The article appears to make the very same point about immutability? What are you saying that’s different?

by dahart

6/27/2026 at 3:48:32 PM

With integers/floats, he's saying it's not opinionated enough. Anything other than integers with minor-unit precision, unless you have a very good reason, is a bad idea. So "floating point is almost a bad idea" doesn't go far enough, and the other alternatives are presented somewhat equally.

The FX critique is saying that it's glossing over a lot of the complexity. I'd say the same is true for the treatment of DE ledgers, and it borders on bad advice (e.g. "Balance is never stored. It’s derived from the movements of money.")

by solumos

6/27/2026 at 4:04:34 PM

> Anything other that integers with minor-unit precision, unless you have a very good reason, is a bad idea.

The article clearly communicates this sentiment, no? What else needs to be said? How much further does it need to go, and why?

It might be a mistake for either us or the handbook to be absolute or dogmatic about floats. It’s not a sin to mention that they exist, and it’s a fact that some people in fintech use them for some reasons that have a defensible engineering position and well considered tradeoffs. I’ve been on the side of assuming people don’t use floats for money and then been surprised when I bumped into people here on HN who report using floats in finance routinely.

BTW, is your quote “almost a bad idea” a typo? There’s a world of difference between ‘almost a bad idea’ and ‘almost always a bad idea’. The actual words in the article, if we’re quoting the article, are: “almost never a good idea” in reference to using floating point types.

> it’s glossing over a lot of the complexity.

Of course it is, that’s a good thing. It’s not pretending to be a spec or rules, it’s an introduction and general principles. The article is already introducing new complexities that people outside of fintech might not be aware of. But do we really have to mention ALL complexity? The biggest problem with Wikipedia is that it’s overrun by nuance and complexity, so much that you often can’t read an article on a topic without already being an expert on that topic. This is why experts are often bad teachers. Being unable to gloss over some complexity is not good for learning and doesn’t make a good environment for newcomers. Let’s allow people to write for non-experts and make room for learning. We don’t have to avoid glossing over some of the complexity; it’s useful to get the general direction and gist correct while leaving out some of the detail.

> it borders on bad advice

Be specific. What’s wrong? Note that contributions are invited.

by dahart

6/27/2026 at 5:31:07 PM

For me quickly scanning over the article, the fact that floating points were even presented as a possibility was an immediate red flag. And I pretty much stopped taking the rest of it seriously.

by 3uler

6/27/2026 at 7:57:32 PM

"Monetary value must be stored in integers" is the much stronger statement that the article doesn't make. Obviously there are exceptions, but you're going to need a much longer side discussion in order to justify why you're using floats.

It's like saying "don't write your own crypto algorithm". Of course write your own crypto algorithm, that's how you learn about cryptography. But you'd never put your homegrown cryptographic algorithm into production until after several PhDs worth of understanding of cryptography has been put into it by many other people.

by fragmede

6/27/2026 at 7:57:06 PM

You can't do everything you need with an integer. There are values you might want to display or calculate with that are smaller than cents. In some places you'll need things like BigDecimal, which are immune to floating point errors in most cases.

It's also safe to return decimal values for displaying values.

by m00x

6/27/2026 at 4:36:10 PM

That was the first thing that popped out and made me distrust the whole wiki; there's only One Right Way to store money (as integers[1], as you said) and it should have been explicit about that.

You can also use fixed-point if whatever you're using supports it but it's still technically integers.

by skipants

6/27/2026 at 2:31:31 PM

> thank you Rust decimals represented as JSON floats

What do you mean? JSON doesn’t have floats, it has numbers, and how they’re used after being parsed is not part of the spec.

> If I ever see a monetary value stored in something else than integers I'm going to run away screaming

That’s good, then we’ll likely not be working on the same system :) I consider running from “amounts as integer” systems these days (but usually unfortunately can’t). In an idealized codebase that only seasoned financial programmers are allowed to touch, it can go well, but such a system is usually either overly exclusive or risks becoming brittle.

by lxgr

6/27/2026 at 3:51:50 PM

> JSON doesn’t have floats, it has numbers, and how they’re used after being parsed is not part of the spec.

I think that's the problem they were trying to describe. Without a formal spec, systems won't agree on how to handle floats. JS engines treat numbers as 53 bit signed floats, so passing a well defined decimal there through JSON means losing precision at the edges.

Money stored in integers gets around the issue by simple virtue of not really needing more than 53 bits to accurately represent the values anyone is going to encounter.

There are downsides like all the extra math or functions to handle doing the math everywhere money is manipulated or displayed, but this is the sort of thing where static typing is really helpful, and isn't too hard for juniors to understand that they should always use money functions to work with money data.

by zdragnar

6/27/2026 at 8:16:10 PM

With I need to represent monetary amounts through JSON, I encode it as a base 10 string and wrap it in quotes so that the JavaScript engines treat it as a string. Conversion back to int happens after the string has been parsed and validated.

I do this with HTTP GET and POST form requests as well. In HTTP, everything is a string (even if that string is JSON).

by dotancohen

6/27/2026 at 2:48:45 PM

I'm sure there is something I don't know here, but how is working with integers "brittle"? The only issue I see is rounding down by default, not sure if that is even an issue or not. At any rate, it seems a lot less brittle than floats or bigdecimal style number classes.

by morpheuskafka

6/27/2026 at 2:56:03 PM

The brittleness comes from the fact that the number of implied decimal digits per currency isn't always well-defined across all stakeholders and systems.

If you're only working in a single currency, there's usually no issue.

by lxgr

6/27/2026 at 3:21:39 PM

As a general rule, you always include the currency code (EUR, SEK, USD etc.) and if possible also the amount of decimals, when using minor units.

Currency codes can be found in ISO 4217.

by foresterre

6/27/2026 at 3:24:39 PM

Yes, definitely always include the number of digits, but at your system boundary you still have to pray that whoever you're working with isn't silently dropping that number and re-deriving it from their own, almost-4217-compliant currency database.

Redundancy can be great, but it's not a panacea, since it's not guaranteed to be used in an optimal way.

by lxgr

6/27/2026 at 8:38:33 PM

How you expose you present your data to third parties is not how you represent it internally.

by jyounker

6/27/2026 at 5:48:37 PM

ISO 4217 also defines the number of significant digits after the decimal separator if Wikipedia is to be believed.

by 0xffff2

6/27/2026 at 2:44:24 PM

> I consider running from “amounts as integer” systems these days (but usually unfortunately can’t).

In the context of Fintech, how do you otherwise resolve floating point rounding issues if not representing amounts with integers?

by lawlorino

6/27/2026 at 2:57:42 PM

Native decimal types, if your system has them. Many languages and databases used in financial contexts do.

by lxgr

6/27/2026 at 5:37:47 PM

But native decimal libraries are almost always floating point.

Do people not know what a floating point number is?

by Maxatar

6/27/2026 at 6:44:24 PM

That’s alright, the important part here is that they’re decimal, not binary. You don’t want 0.1 + 0.2 to equal 0.300…004.

by lxgr

6/27/2026 at 7:56:05 PM

There are pretty trivial ways to use binary floating point values that don't result in 0.1 + 0.2 producing 0.30000...4 and it saddens me when this topic comes up and people go to such extreme lengths to recreate a second hand buggy reimplementation of a subset of floating point numbers to do it.

by Maxatar

6/27/2026 at 3:41:53 PM

An integer for the value (scaled by number of decimals) and an integer value for the number of decimals. Different systems may use different values, even for the same currency or asset.

by simpsond

6/27/2026 at 5:36:05 PM

What exactly do you think a floating point number is?

by Maxatar

6/27/2026 at 11:22:35 AM

Word of advice to anyone considering the "minor-units precision" strategy for representing monetary amounts: Don't (or at least, don't use it as an interchange/API data format).

It seems like a clever idea (fast integer math, no rounding problems for addition and subtraction), but it'll bite you incredibly hard if you ever stumble upon an edge case such as working with a partner that has a different implied number of digits for a given currency. This is especially relevant for stablecoins, which often have a different number of implied decimal digits than the "fiat" currency they represent.

Also, consider representing amounts as a string type in JSON-based APIs. JSON does not specify decimal precision, so you (and all your users/vendors) will always have to make sure your parser/serializer doesn't internally lose precision by going via floating point. This can get ugly fast, and while a string seems conceptually less neat, it completely bypasses that problem. (Some will call this an anti-pattern [1], but I'd rather not fight this particular battle for ideological purity on the shoulders of my users or shareholders.)

[1] https://blog.json-everything.net/posts/numbers-are-numbers-n...

by lxgr

6/27/2026 at 12:57:32 PM

The only real correct solution here is to send mantissa and exponent as two separate integers. It's trivial to convert between exponents for whatever math you want, it can be as correct as you want, and is unambiguous.

In the HFT space you save some wire space if you can commit to a consistent exponent for some {slice} up front (think instrument/tick-size/asset-class/exchange/feed/server/whatever/...) such that you only need to send the mantissa and your clients can have a hard coded exponent. However, in similar spaces it's often worth the extra uint32 to send a on-the-wire exponent such that things _can_ change and you aren't hamstrung later by earlier "we only need cents now!" design choices when, e.g., you suddenly need to support bitcoin/... prices to full precision. (your users will thank you when they don't have to coordinate a breaking change when you want to adjust your fixed exponent)

by noitpmeder

6/27/2026 at 1:32:08 PM

If you do that though aren't you just reinventing floating-point?

by microgpt

6/27/2026 at 7:49:40 PM

No, standard floating point implementations have higher precision for smaller numbers than larger. So for example, in a 32bit float, there are far more numbers between 0-1 than there are between 1,000,000 and 1,000,001. For 32bit floats, you start lowing whole integers with relatively small numbers.

Integers have a consistent precision across the entire number line.

by OtherShrezzing

6/27/2026 at 4:18:40 PM

No, because you're doing decimal floating point, which eliminates the rounding errors of binary floating point.

by jjmarr

6/27/2026 at 1:35:20 PM

> The only real correct solution here is to send mantissa and exponent as two separate integers.

That’s essentially the same thing as a String-serialized big decimal, just less readable, no?

by lxgr

6/27/2026 at 3:13:10 PM

That’s quite a bit slower to process. At least if you’re converting to integers to do the calculations and the calculations would be quite a bit slower if you kept the big decimal type

by gmm1990

6/27/2026 at 3:18:58 PM

True, but this is usually your least concern when you're dealing with monetary amounts/math.

by lxgr

6/27/2026 at 8:19:44 PM

I guess I’m coming at it from an optimizing market data provider perspective once you preallocate memory the next thing to optimize is the string decimal conversion if the feed isnt binary encoded

by gmm1990

6/27/2026 at 7:59:52 PM

It might be your least concern, and that's fine but it's not the least concern for many people who need to process large volumes of transactions.

Money, even within fintech, is a concept used across a wide variety of domains, and you can't assume that what concerns you is what concerns everyone else relying on it elsewhere.

by Maxatar

6/27/2026 at 4:08:43 PM

They specifically mentioned HFT so I suspect they care a lot about processing speed

by mnahkies

6/27/2026 at 12:33:10 PM

Having done HFT / low-latency in C++ with a browser based (read: JavaScript) management front-end: Go ahead and use integer cents everyone. It’s practically an industry standard and it works just fine. Anything else is a worse compromise.

by antonymoose

6/27/2026 at 4:49:43 PM

If someone sells you 12345.55 EUR vs USD at a rate of 1.12345, how many EUR do you think you end up with? Do you think all market participants even agree? What if the rate is 1.123456?

For added fun, you can introduce division. Some systems will allow you to sell 12345.55 USD to buy EUR at a rate of 1.12345.

The article’s “no lost data” tenet is not really viable when this sort of division is involved. Are you going to track your account balance is a rational number with an absolutely immense denominator forever?

by amluto

6/27/2026 at 8:10:21 PM

Of course market participants agree?

Exchanges have calculation rules for every type of mark and payment and will always specify rounding.

by dumah

6/27/2026 at 7:18:58 PM

You store the sums on either end, the currencies, the exchange rate and the final sum? No one has .0000145 cents in their account. Rounding occurs in the real world.

by antonymoose

6/27/2026 at 8:01:33 PM

> You store the sums on either end, the currencies, the exchange rate and the final sum?

There is a remarkable amount of disagreement as to whether one should do one’s back office work based on the price or based on the quantity of the counter currency.

> No one has .0000145 cents in their account. Rounding occurs in the real world.

Indeed. But you either need to convince all parties to agree to round the same way or you need to accept small errors

by amluto

6/27/2026 at 8:46:50 PM

My experience in consumer banking says that every instrument specifies the precision of the calculation, how and when rounding happens, and slew of little details.

So, yes, everyone has to understand how all their partners are doing rounding and summing.

by jyounker

6/27/2026 at 1:18:54 PM

It is fine as long as you don’t cross any edge cases (crypto, or more recently stuff like AI token pricing) and don’t forget to account for third party quirks (e.g. Stripe’s zero-decimal currencies: https://docs.stripe.com/currencies#zero-decimal).

by notpushkin

6/27/2026 at 2:27:40 PM

JPY not having any minor units is arguably not a “third party quirk” but just how the currency works. The same goes for various three decimal digit currencies.

by lxgr

6/27/2026 at 2:25:07 PM

If you’re only trading in USD and other two-decimal currencies it can work fine, yes. For anything else, it’s much worse as also detailed in TFA.

by lxgr

6/27/2026 at 7:22:48 PM

You provide different handling strategies for different currencies. You also sort currency data alongside your amount. There is nothing complicated or edge-case here.

This works for USD, JPY or $MEMECOIN and it scales very well.

by antonymoose

6/27/2026 at 1:18:37 PM

Agree with this, working from HFT to payments to account management in the past.

You can have the blockchain team be an expert in converting integer cents, or the forex team be an expert in sub-cent conversions. You don't want to require _every team_ to have expertise in float math, by default.

by DetroitThrow

6/27/2026 at 2:43:43 PM

Big decimals are widely available and don’t require any expertise but avoid many of the footguns of implied decimal integers.

by lxgr

6/27/2026 at 8:06:39 PM

BigDecimal should be used by almost everyone except for HFT since they're really slow.

by m00x

6/27/2026 at 8:05:09 PM

Imagine advising someone who explicitly said they work in HFT to use big decimals.

by Maxatar

6/27/2026 at 11:28:09 AM

> but it'll bite you incredibly hard if you ever stumble upon an edge case such as working with a partner that has a different implied number of digits for a given currency

Why would that be a problem? You just transform the values when interacting with their API.

by denismenace

6/27/2026 at 2:26:10 PM

Because a lot of the time there won’t be any error when you’re wrong, just silent data loss.

by afavour

6/27/2026 at 3:14:43 PM

I’ve seen bugs like this in prod systems. The notional value of the error tends to make the people concerned anything but silent.

by andylynch

6/27/2026 at 1:33:15 PM

Customer was charged $0.995 after fees, how to represent in your data model with integer cents?

by microgpt

6/27/2026 at 3:10:21 PM

You'll have to decide when and how to round. Keeping individual billing items at high precision and rounding after summing them up can work; defining and documenting a rounding policy (or complying with whatever's legally required in your jurisdiction/domain) and rounding each individual billed item can as well.

by lxgr

6/27/2026 at 4:38:02 PM

You use 1/1000th or 1/10000th or whatever you need. You do not need “cents”.

by snsnsjjsjsiisa

6/27/2026 at 6:23:58 PM

Currency: USD Amount: 99500 Decimals: 5

by denismenace

6/27/2026 at 2:20:50 PM

Round it up

by xprnio

6/27/2026 at 3:30:12 PM

Charge $0.995

Refund $1.00

Repeat

by microgpt

6/27/2026 at 12:07:03 PM

Exactly, model is in integers and representation can be 1⃣3⃣ or whatever, that's why model-view separation exist.

by xlii

6/27/2026 at 12:21:07 PM

Sure, you can do that if you can absolutely guarantee that everyone will always respect that separation and there will never be ambiguity between your internal and some partner's representation – even during incidents, even during low-level CSV-to-DB ETLs during incidents ("just one time, I promise, we don't have time to build the proper adapter, but look how similar their and our formats are").

by lxgr

6/27/2026 at 11:29:23 AM

Sure, but are all your (and your users' and vendors') engineers and LLM agents going to remember that? When in doubt, always be explicit.

by lxgr

6/27/2026 at 11:56:31 AM

I'm curious how you handle that.

Let's say I operate with a 4 decimal expectation and your API expects 6, is there any way to reconcile that outside of documentation and or metadata ? (which would be the same issue I guess whatever representation is used ?)

by makeitdouble

6/27/2026 at 12:00:24 PM

Yeah, you need to document it.

Still, even if you do: Chances that your users are just going to assume you're conforming to ISO 4217, some national standard, or your competitor that they're already integrated with are pretty high, so I wouldn't take the chance. Pick something that doesn't have to be documented instead.

by lxgr

6/27/2026 at 5:34:57 PM

I think I’m agreeing with you whole-heartedly if I say that article’s conclusion is at best extreme and unrealistic when it says “the parsers need to be fixed. They should support extracting any numeric type we want from JSON numbers and at any precision.”

This sounds like an unreasonable position to take. “Any” is an unachievable standard that could require an unlimited engineering budget with no demonstrable value in practice.

It is good to identify the lack of a standard, and to talk about what parsers do in practice, and good to discuss the gaps and unmet use-cases. It would be a good idea to suggest that there should be a more reasonable standard, perhaps. It’s just not a good idea to demand that everyone support “any” possibility when no one really needs that, no one knows what it means, and it’s not actually possible to achieve.

by dahart

6/27/2026 at 11:27:59 AM

What do you recommend instead? Standard floating-point ("float"/"double"), fixed-point arithmetic with thousandths (or smaller) of the minor unit, arbitrary-precision decimal numbers, or something else entirely?

by gucci-on-fleek

6/27/2026 at 11:39:07 AM

I think what matters most is your database and API representation, as well as having consistent and well-defined rounding rules.

I largely agree with TFA: Round explicitly and consistently whenever you cross a boundary, i.e. database persistence and internal API calls.

Use whatever works for your required business case internally (i.e. inside of procedures calculating some function of one or more input amounts). This can be regular old floats/doubles if you absolutely know what you're doing, or BigDecimal if you aren't and would rather suffer slightly slower performance than having to talk to an auditor about IEEE 754 rounding modes, or even minor-amount integers (yes, even though I just said to not use them – but you'll want to ABSOLUTELY NEVER leak them outside of your system, including your data/analytics pipeline, which might have different ideas about financial amounts than your business logic implementing a nice custom monetary type).

by lxgr

6/27/2026 at 11:40:28 AM

A string type. As parent says: it completely bypasses the problem. Save the numbers between double quotes and be done with it.

by ivanmontillam

6/27/2026 at 2:34:42 PM

Except that now you have a new problem: Opinionated theorists that haven’t been part of a nasty “oh no, we accidentally considered some amounts as 10x/100x/1000x larger/smaller than expected” incident in their career yet…

by lxgr

6/27/2026 at 12:26:15 PM

Storing numbers as arrays of u8? That doesn't make sense

by portly

6/27/2026 at 1:01:20 PM

For JSON serialization, which doesn't support fixed-point precision it does.

Floating-point precision has too many gotchas for being suitable to store Decimal types, especially for the Currency use case.

by ivanmontillam

6/27/2026 at 1:22:47 PM

Surely it does:

  {
    "price": {
      "amount": 1000,
      "decimal_places": 2,
      "currency": "USD"
    }
  }

by notpushkin

6/27/2026 at 1:38:44 PM

How is that better than {“amount”: “10.00”} (which also bypasses all potential floating point parsing issues that your or your counterparty’s JSON library might have)?

by lxgr

6/27/2026 at 2:15:03 PM

It is explicit about the fact that that number of decimal places is part of the data.

The semantics for your string “10.00” are complex - is it considered equal to “10”? To “10.000”? To “10.001”?

A user interacting with an API that uses such a string might make all sorts of assumptions about what it supports.

A user interacting with an API that has an explicit decimal places concept is being told ‘decimals matter! They can vary! Here be dragons!’

by jameshart

6/27/2026 at 3:07:06 PM

> The semantics for your string “10.00” are complex - is it considered equal to “10”?

Yes, but "10 USD" would be a non-canonical representation and you probably serialized incorrectly.

> To “10.000”?

Yes, but same caveat as above applies.

> To “10.001”?

Obviously not, and any system you'd ever want to use in a financial context will tell you so.

by lxgr

6/27/2026 at 1:36:25 PM

It makes a lot of sense if you value correctness over performance.

by lxgr

6/27/2026 at 1:46:48 PM

Why not store them in unary then?

by microgpt

6/27/2026 at 2:28:43 PM

Unary is exactly as expressive as decimal or binary for integers, but somewhat less efficient, so why would you?

by lxgr

6/27/2026 at 3:29:53 PM

idk, why would you store integers as ASCII strings? It's somewhat less efficient.

by microgpt

6/27/2026 at 4:05:40 PM

Because it's much more explicit. Computers are fast, engineering is expensive. You usually never want to optimize prematurely when dealing with monetary amounts.

by lxgr

6/27/2026 at 11:54:28 AM

Do not throw away any precision in finance/money computation, regardless what/ how you are doing it.

In C# e.g., there is type decimal for those computations.

by KellyCriterion

6/27/2026 at 12:02:29 PM

You'll definitely have to throw it away at some point.

The art is in making those points well-defined and rare enough to not cause large discrepancies, but frequent enough to avoid ballooning arbitrary-precision numbers across databases and services that might not be able to handle them.

by lxgr

6/27/2026 at 1:07:48 PM

I really like that phrasing! Would you mind if I steal in some form if I decide to review this part of the book?

by krever

6/27/2026 at 1:41:55 PM

Not at all, and thanks for writing all of this up!

by lxgr

6/27/2026 at 12:33:17 PM

Floating point value stored multiplied by 10^8. That gives you a huge integer, but it's extremely accurate, especially for US denominated currencies. Easily transformed into floating point numbers for reporting/etc.

by necrotic_comp

6/27/2026 at 2:57:57 PM

What is with this Twitter esque style of discussion? Post some vague comment with no real stake in the ground, but just reply to follow ups asking for clarifications about the right way. It's exhausting. Why not put all that effort into the initial comment?

Vague-posting seems to becoming more popular

by gib444

6/27/2026 at 3:22:01 PM

If there were a simple one-size-fits-all solution to these problems, there wouldn't be a need for a handbook, nor for a discussion, would there?

I can't design everybody's systems here, but I was hoping that sharing some war stories that have cost me days or weeks of work might sensitize somebody to a few non-obvious footguns.

by lxgr

6/27/2026 at 3:39:28 PM

That strawman is so large it would even scare away a human

by gib444

6/27/2026 at 1:33:34 PM

As a programmer, what I feel when I see fintech programmers each speaking from their own different experiences and perspectives is that it makes me wonder what it really means to be good at programming.

What user xlii said about not storing monetary amounts as floats is a common IEEE 754 issue. And while it's true that financial tracking should be done through immutable logs or event-based records, I don't think every surrounding service needs to be built with event sourcing. I think it's enough to apply it only to core logic like ledgers, settlements, orders, and executions. Looking at xlii's comment, it seems like a technique that only becomes viable when the modeling is successful.

User lxgr's comment points out that it's a minor-unit issue. If JSON numbers are parsed as floats by the language or parser, precision can be lost. Usually people send values with a separate decimal places field. However, I've heard that in HFT, they don't do that because the overhead itself is too costly.

And antonymoose's comment aligns with what many books say. That's why designs like this are common in FX or API contexts. It feels like protocol design, doesn't it?

Putting it all together, everyone's right within their own domain. While I think it'd be great to have someone like xlii as my senior programmer, I also feel like I wouldn't be able to design such a complex system myself. In that sense, everyone's statements are valid, and it's interesting to see how opinions diverge depending on the domain. Is this what expertise looks like

Looking at all this, it seems like you can roughly infer where a programmer is coming from based on their experience. Sometimes programming doesn't feel like finding the right answer, but more like choosing a worldview

Watching how programmers model their domains on HN is always fascinating. Sometimes I click on their profiles and add their domain knowledge to my own personal wiki, thinking I might use it someday

by jdw64

6/27/2026 at 7:19:44 PM

I would like to hear more about this wiki you have.

by Fordec

6/27/2026 at 1:45:19 PM

Nice. The book contains a bunch of good information that could already be found elsewhere but collecting it is quite practical. I highly suggest to read Kleppmann's Designing Data-Intensive Applications. The first edition was very good, a second one came out recently.

I was CTO of a FinTech where I built the whole software stack from scratch: the lessons in the book are mostly correct. I say mostly, because as always, there is a lot of "it depends" to take into consideration for your particular project. For example, I chose to not use event-sourcing to avoid the whole state computation issue. A standard append-only audit trail can do the job.

You can't guarantee exactly-once delivery but you can construct effectively-once processing, and that is what you really want.

Store every request and response : absolutely, and not only when consuming APIs, but when collecting any information from the outside world (and, if you can, also log every intermediate transformation step within your perimeter). Content-adressed buckets + a relational table are great for this.

The text also does not mention anything about data lineage. What happens if a vendor updates some data mid-day that you absolutely need to be aware of? You need to be able to account for that, while also re-playing computations that used the old values and get the same result. It's not a particularly hard problem to solve, but it takes some thought.

by belmarca

6/27/2026 at 12:01:11 PM

I think most of this applies to software engineering generally, not just fintech.

For example the parts talking of retries, idempotency, event ordering, etc. This applies to all systems that require any degree of accuracy, even if no money is directly involved. I've seen so many systems built on the assumption that "we can always retry", but you can only retry if you fail cleanly in the first place, and if the downstream system offers the same level of idempotency that you think it does. Quite often these are not put to the test.

by benashford

6/27/2026 at 1:54:03 PM

I agree. Very little in here specifically applies to fintech except the ledgering and rounding parts, which are pretty light.

I would prefer to read a defense of something more radical like "database per account." Something that has unique tradeoffs within fintech.

Also, the main advice I would give to fintech engineers/founders is to take risk and compliance seriously from day one.

Financial systems are based around trust. If you don't provably mitigate risks you will lose trust and, eventually, your entire business.

by jappgar

6/27/2026 at 12:50:08 PM

[dead]

by jimmypk

6/27/2026 at 2:45:27 PM

> even bad advice

That's putting it politely. Honestly, I think this "handbook" was mostly written by an LLM.

For example, in the immutability section we have this:

   "Separating PII from financial data lets you honor erasure without losing the financial history you’re obliged to keep."
In a financial organisation the two go hand-in-hand for obvious KYC/AML reasons.

Keeping the financial data whilst trashing the customer names, addresses etc. instantly on-demand before the expiry of the relevant time periods is going to leave your entire organisation with a very bad day in the office if a $lawful_body comes knocking for the data to trace a crime.

People going to work in a Fintech should not be relying on a random "Handbook" written by an unknown person in an unknown jurisdiction.

People going to work in a Fintech should only ever work in accordance with their employer's internal handbooks/guidelines/etc which will have been written in conjunction with their firm's lawyers and compliance people to ensure it complies with the laws and reporting requirements in the jurisdiction(s) in which their employer operates.

by traceroute66

6/27/2026 at 2:53:37 PM

> Keeping the financial data whilst trashing the customer names, addresses etc. instantly on-demand before the expiry of the relevant time periods [...]

Where does TFA recommend that?

As I see it, it recommends separating PII data you'll eventually have to delete from that you'd probably want to keep forever (including data factoring into your accounting equations/invariants), so that you can delete the former after the relevant recordkeeping periods have elapsed.

> People going to work in a Fintech should not be relying on a "Handbook" written by an unknown person in an unknown jurisdiction.

Sure, but they should also not blindly ignore any ideas and practices presented, or avoid looking beyond their own organization. Ideally, they'll then try to reconcile what they saw with their own knowledge and local regulations etc.

> People going to work in a Fintech should only ever work in accordance with their employer's internal handbooks/guidelines/etc which will have been written in conjunction with their firm's lawyers and compliance people to ensure it complies with the laws and reporting requirements in the jurisdiction(s) in which their employer operates.

Sure, in a world in with only perfect and error-free organizations, that seems like a reasonable approach. But how does one get there without having a conversation such as this one?

by lxgr

6/27/2026 at 2:56:10 PM

> any ideas and practices presented

Unless its your job to architect stuff, in a financial firm you don't go looking around for ideas and practices.

You comply with your employer's practices end of story.

If you like looking up ideas and other people's practices then a heavily regulated environment is probably not the place for you.

> how does one get there without having a conversation

"having a conversation" about new ideas/practices in a regulated firm will involve lawyers and the compliance department.

More than likely that "conversation" will be above most people's pay grade. So you're better off just not wasting your time and adhering to your employer's existing practices.

And for everyone else, its an expensive and high-friction conversation to have if you want to change existing practices.

by traceroute66

6/27/2026 at 3:04:43 PM

"Not thinking, just complying" isn't the panacea for good outcomes you make it out to be. You definitely want to limit the amount of excitement, but I've seen many issues caused by legacy formats and practices as well.

> You comply with your employer's practices end of story.

What if you're the employer ("first engineer" etc.), and there are no practices yet? Fintech almost by definition sometimes includes doing things from scratch because some existing solution or incumbent organization isn't working that well anymore.

> Unless its your job to architect stuff

Which seems to be the target audience/scenario for TFA.

by lxgr

6/27/2026 at 3:23:12 PM

> What if you're the employer ("first engineer" etc.), and there are no practices yet?

In that scenario the practices will still come first. You're not going to be doing any coding or systems engineering until you've got compliance signed off. You're going to be spending lots of time with lawyers and compliance people.

> Fintech almost by definition sometimes includes doing things from scratch

Yes, but cut through the noise of the typical Fintech fancy website and app and you're still staring straight down the barrel of spending 80% of your time on regulatory compliance.

Try as you might there are only so many ways you can re-invent the wheel for dealing with hard-facts legislation.

by traceroute66

6/27/2026 at 3:30:21 PM

Please show me the regulation that tells me whether to use big decimals or integers in my internal monetary amount representation. Regulations usually care about outcomes (sometimes high, sometimes low level); they often don't tell you how to technically achieve them.

And if your lawyers and compliance people are actually telling you that you can absolutely not do any financial processing yourself, that the only possible way to be compliant is to license <incumbent product xyz> (unfortunately only available in COBOL) etc., you might not actually be working in a fintech, or at least not in the kind this guide seems to be targeted to.

Frankly, this kind of attitude is exactly why banking and payments is as fossilized as it is in some countries, and why fintech is eating their lunch in many cases. There has to be a balance between trying new things and doing what everybody else is already doing.

by lxgr

6/27/2026 at 2:47:09 PM

A Plaid balance check is NOT a guarantee that the ACH debit you're about to submit will go through.

I don't care if the balance is one million, before that ACH can process, every single dollar can be (a) wired out, (b) cleared out by yesterday's ACHs (bills, autopay, whatever) and checks, or (c) spent at debit/ATM.

I probably shouldn't tell you why I know that some fintechs don't address this.

by morpheuskafka

6/27/2026 at 8:09:08 PM

It's a good indicator but absolutely no guarantee. I've had to tell project managers this because they didn't understand this concept.

by m00x

6/27/2026 at 10:59:37 AM

The idempotency keys section alone is worth the read most devs learn that lesson the hard way.

by danielabinav160

6/27/2026 at 12:24:42 PM

I just wish the financial industry itself had known about these when the core banking systems and financial communication protocols of the 60s and 70s were invented that are still being used to this day...

Many of these predate the widespread knowledge of idempotency, so often idempotency keys are hacked together by joining various, hopefully globally unique fields, except that they never quite are. (You can look behind the curtain sometimes, e.g. when your bank does not let you transfer the same amount to the same recipient account on the same calendar day.)

by lxgr

6/27/2026 at 11:28:53 AM

Also audit trails. Good audit trail can save company (and you) in emergency as well. Useful for debugging and last resort of compliance data source.

by __natty__

6/27/2026 at 5:09:42 PM

I just build the audit trails and skip the non audit trails.

That way I can debug and have a last resort of compliance, but also save time by not building the first resort of compliance.

by mrkeen

6/27/2026 at 11:32:40 AM

100%. It deserves more detail, too.

I've spent many hours explaining how idempotency is supposed to work, and why it's important. Most teams understand the need for it, but very few thought about it up front.

by pards

6/27/2026 at 5:39:08 PM

"Fintech" is extremely broad, and most of what gets called "Fintech" is really communication. Communication between firms, between traders, between systems, between ledgers, etc. There is no industry-wide "right" way to program anything, because the right way is ultimately whatever way the other party you're communicating with will understand.

If you're dealing with a party who tracks currency in cents, then tracking currency with more precision than that is going to lead to rounding disagreements. Vice versa if you deal in cents but they deal in tenths of cents. And so on for all the other advice in this document.

by wavemode

6/27/2026 at 11:57:33 AM

I have just left a fintech company after 5 years and I can say after reading this, it looks legit to me (not AI slop as someone asked). These are the same sort of lessons I learned during my time in the industry.

I would recommend anyone starting in fintech to take some time to understand accounting principles and the ledger in a bit more depth than just debits vs credits - this is likely what is most unfamiliar to programmers.

Also financial software is very data-heavy and I learned more about databases in my time working in fintech than the 15 years before that. I think going into a bit more detail about even the basics (indexes) will save a lot of headaches.

by cirrhosis

6/27/2026 at 12:16:10 PM

> I would recommend anyone starting in fintech to take some time to understand accounting principles and the ledger in a bit more depth than just debits vs credits

Any good resources you would recommend to learn more about this?

by sdevonoes

6/27/2026 at 7:46:00 PM

I've seen a few attempts at "accounting for programmers" guides, some of which I came across while browsing HN (if you search you'll find plenty). The one I used to send new developers was one such guide[1]. They also have another on building a ledger[2]. These are a good start and I wish I could recommend a proper textbook that goes into more detail - detail that I wish I had known early on - but I learned mostly as I went along.

[1] https://www.moderntreasury.com/journal/accounting-for-develo...

[2] https://www.moderntreasury.com/journal/how-to-scale-a-ledger...

by cirrhosis

6/27/2026 at 12:52:16 PM

Anyone know of resources like this but for capital markets? Things that would allow engineers new to trading equities, options, FX, bonds, and commodities to learn about different flows, market structure, common architectures, and other things that normally you learn from years of experience.

by koliber

6/27/2026 at 1:22:54 PM

Equities and (listed) commodities are relatively easy to get a handle on but it genuinely takes months / years even at the frontline to understand how fixed income and FX works because its still almost entirely an OTC market. There is more central clearing than ever before but e.g. if I (say) buy a bond, fund it using a repo, swap my loot back some other currency, quite a lot of this could easily still be relying on humans pressing buttons and wiring money around.

To learn how and why these things are traded, however, read this book, the only (good) truly beginners guide to fixed income:

https://www.jdawiseman.com/books/pricing-money/Pricing_Money...

by mhh__

6/27/2026 at 3:30:49 PM

"Trading and exchanges" is the classic one everyone reads for listed markets, I should add.

by mhh__

6/27/2026 at 11:40:37 AM

Does anyone have more learning resources in this field? Any model implementations, pet projects, anything to get going?

by ricardobayes

6/27/2026 at 1:30:54 PM

I don’t work in fintech (yet) but I’ve studied finance recently and quite a lot of these pieces of advice are just intuitive when you know the business domain. Learning the “customer” of your software helps too

by rTX5CMRXIfFG

6/27/2026 at 6:35:21 PM

> For whom?

It's refreshing to see someone using the correct phrasing.

The often-seen, stupid way is 'who is this book for'.

by penguin_booze

6/27/2026 at 12:49:02 PM

Does fintech here mean "crypto" and central bank currencies transactions?

by senthil_rajasek

6/27/2026 at 3:23:29 PM

Thank you. It came at a much needed time.

by Ajpop3y

6/27/2026 at 11:33:41 AM

First half didn’t sound so bad.

by dapperdrake

6/27/2026 at 3:23:54 PM

Thank you so much for this. It came at the needed time

by Ajpop3y

6/27/2026 at 12:48:09 PM

> Webhooks are the most common way to receive signals from external systems, but processing them safely is not trivial

I see webhooks documented all the time, but I have yet to use them in practice, nor have my customers requested them. Is the above not true, or are they widely used in some sectors and not others?

by jgalt212

6/27/2026 at 1:07:26 PM

In payment gateway integration, webhooks are usually considered a single source of truth for updating the payment status, with status check api as a fallback.

by intelcoders

6/27/2026 at 2:45:40 PM

They are indeed everywhere, but it's possible you don't have a need for them. For example, every time you buy something online using Stripe, the seller receives a webhook indicating that a purchase was completed.

by f3408fh

6/27/2026 at 1:57:21 PM

I receive webhooks all the time as ack that something was processed/ or a notification of the status of some sort of thing in an external system that we don't control.

by weatherlight

6/27/2026 at 7:24:14 PM

[flagged]

by vshulcz

6/27/2026 at 1:12:49 PM

[flagged]

by anchorapi

6/27/2026 at 1:26:09 PM

[flagged]

by ermantrout

6/27/2026 at 12:05:26 PM

Hey, author here. Happy to take feedback or answer questions.

P.S. I have no clue how HN works, I posted it myself yesterday and it got 6 points. ¯\_(ツ)_/¯ Anyway, glad for the reach.

by krever

6/27/2026 at 11:02:30 AM

Sorry have to ask these days. Is this carefully written down information from years of experience in the field or AI slop?

by dc_giant

6/27/2026 at 8:51:12 PM

I worked for a few years in consumer banking, and this looks like solid advice.

by jyounker

6/27/2026 at 11:15:00 AM

Appears that the author got some help organizing the document, but wrote it all themselves.

by jagged-chisel

6/27/2026 at 12:02:34 PM

Hey, author here :)

Its at least 80% organic artisanal writing and maybe 20% AI when I needed help with grammar, completeness, broader perspective and everything around.

by krever

6/27/2026 at 12:39:28 PM

It may be a good idea to start the book with a really short "About the author" to state exactly this and your work experience. Otherwise looks well written to me, good job! :)

by logdahl

6/27/2026 at 4:37:59 PM

Native English speaker. I scanned it and IMO there's a slight overuse/misuse of hyphens. Maybe the AI tool could be asked to identify and correct? (The hyphens might be triggering people to think it's AI, too).

They mostly need replacing with a full stop or a colon.

E.g.

"In practice this means storing the amount as an integer in its smallest unit - €12.34 becomes 1234"

->

"In practice, this means storing the amount as an integer in its smallest unit: €12.34 becomes 1234."

or

"In practice, this means storing the amount as an integer in its smallest unit (e.g., €12.34 becomes 1234)"

by gib444

6/27/2026 at 8:12:50 PM

Hyphens here are meant to be formatting. You would be correct if this was a literary piece, but handbooks and sheets don't need to use these rules.

by m00x

6/27/2026 at 8:50:04 PM

It's a misuse because in this context the hyphen could be mis-construed as a negative amount, and this causes the reader to stop and carefully re-read the content to ensure that they're not misinterpreting it. That's not where you want to be spending your reader's attention.

by jyounker

6/27/2026 at 11:15:40 AM

Whilst I wouldn't say anything in it requires years of experience to know, this would be helpful for someone who hasn't considered anything about monetary systems. It doesn't read like slop, but I could be wrong but even so it all seems fairly reasonable (I've only fully read about 50% before realising there's nothing new here for me, and then skimmed to rest).

by zipy124

6/27/2026 at 11:20:59 AM

Skimmed it and based on my experience in fintech, it looks good, accurately represents the real world. I guess there’s still a chance it is AI generated but it doesn’t seem like vacuous slop, it has substance!

by manwithopinions