alt.hn

6/5/2026 at 2:30:50 PM

I tested every IP KVM in my Homelab

 https://www.jeffgeerling.com/blog/2026/i-tested-every-ip-kvm/

by vquemener

6/5/2026 at 4:44:00 PM

+1000 points for the PiKVM V4 Plus. We (Revise Robotics - a YC company!) refurbish laptops with robots and AI - as part of this, we (or rather, the AI) send(s) keyboard commands in software to the computers we're refurbishing.

How/why? The AI needs to navigate the BIOS among other tasks - so we need a KVM to send arrow down and enter, roughly speaking.

We were a GL.iNet KVM shop until we ran into a nasty issue with a specific ThinkPad - the GL.iNet would send an incorrect USB 0 byte which most laptops ignored, except this ThinkPad which was freaked out by it / beeped / wouldn't accept any key command.

I couldn't let this problem go, so I got a low level USB debugger [0] (which I extremely recommend) and wire-debugged the USB signal, A/B comparing the GL.iNet and the PiKVM. The PiKVM was doing things properly (usb-wise), so we swapped all (~10) of our KVMs for it.

I also remember that the GL.iNet was stranger/more difficult to customize (it's just running pikvm the software but doesn't let you customize it as much). The GL offers a nicer UI, but it doesn't matter that much (we drive it via API) and we're happy to support the actual PiKVM authors/company. It's a fantastic product. Not cheap, but truly truly great.

P.S. If someone from GL wants to reach out, I can offer you a lot of low-level debugging info -- fixing this issue would be great.

[0] https://greatscottgadgets.com/cynthion/

by gregsadetsky

6/5/2026 at 5:53:23 PM

I think if you can afford it, the PiKVM is still the gold standard... and also one of the best engineered devices, with the most flexibility. It costs a lot because it's worth it.

They also have a nice (if messy) solution for multiple device management with an external box (TechnoTim had some good coverage on his channel/website[1]).

Most other Pi-based KVMs use PiKVM's software anyway, and I'm not sure if any directly support PiKVM upstream (they should, IMO).

The other class is the JetKVM and its derivatives (many forked JetKVM's snappier Go software), and that's another reason I've stuck with JetKVM itself. It seems to have a nice community around it for mounts in almost any situation, and hacks to get weird things working correctly with it. They're also going to have a PoE + full-size HDMI version soon, I think, with microSD for expanded ISO storage.

[1] https://technotim.com/posts/pikvm-at-scale/

by geerlingguy

6/5/2026 at 5:41:03 PM

Just wanted to give you kudos for having a hw company in nyc. You don't see to many of those around :p

by ddritzenhoff

6/5/2026 at 10:42:53 PM

Surprised no one's built a BIOS MCP yet

by nmilo

6/5/2026 at 10:44:14 PM

Extremely please build one! I'm serious. :-)

by gregsadetsky

6/5/2026 at 7:42:31 PM

I'm not from GL. I write my own USB HID handlers and I'm being nosy about bad protocol that exists in the wild. Was the 0 byte in some input report? In a descriptor? Somewhere else?

by JdeBP

6/5/2026 at 9:00:36 PM

TLDR - GLKVM's kernel emits a trailing 0-byte DATA packet (ZLP) (which PiKVM does not)

Supposedly, this is due to the `req->zero = ((count % maxpacket) == 0)` line in the kernel's f_hid.c - which, for 8-byte HID keyboard reports, makes it append a trailer packet. Strict BIOS HID stacks treat this 0-byte packet as malformed and beep.

by gregsadetsky

6/5/2026 at 11:51:05 PM

Interesting. My first thought is wondering whether the keyboard HID is adding report IDs to its input reports, because it isn't in boot mode or something. That would have that effect.

by JdeBP

6/5/2026 at 7:04:39 PM

$400 for kvm?

by noncoml

6/6/2026 at 2:31:14 PM

You're supporting the developers original work at that price. There's plenty of cheaper devices that take that original work and just throw it on some chips

by Zetaphor

6/5/2026 at 8:06:41 PM

It's one of those things where $400 is WAY too much for a homelabber, but most companies (even small ones) can barely count that low when speccing out hardware, ESPECIALLY these days. $400 is like one hard drive in a machine that will potentially have 8-24 of them.

......Unsettlingly that's also like 16GB of dram in a machine that might be measuring memory in TBs

by atomicnumber3

6/5/2026 at 8:36:08 PM

I kinda wanted to get a KVM recently, but decided to save my money to afford RAM for my planned server build instead. Might even get a 32 GB kit for $400.

by Hamuko

6/5/2026 at 8:55:08 PM

don't these boxes already have a BMC? KVM is kind of poor man's BMC.

by noncoml

6/5/2026 at 10:27:31 PM

There are tons of devices used that have no built-in BMC (like the Thinkpads in the original comment in this thread), yet still need reliable remote control in certain cases (e.g. a remote lab, or multiple-unit headless testing).

It would be a bit odd if a place was deploying new Dell servers and slapping IP KVMs on top of them.

by geerlingguy

6/5/2026 at 11:48:58 PM

OK, I just don't see the intersection of people/companies that are using thinkpads in their server room and those willing to pay $400 for a KVM being too large

by noncoml

6/6/2026 at 4:36:56 PM

I backed jetkvm on kickstarter or indiegogo or whatever site they launched on out of excitement. It’s a well made device, the software is clean. It feels like it’s stopped being iterated on though which is a bummer (the tariff timing was likely brutal).

Even though I have it on Ethernet on a gigabit network at home, with WiFi 7 mesh that gets 950mb up/down to the internet, I’ve never been able to use jetkvm whether through their cloud portal or through direct ip connection without it feeling very sluggish. It’s plugged into an aging NUC that I know is still performant, and I previously had no machine setup with settings configured to a smooth basically realtime feel even over Tailscale remotely, so I don’t know if I just am using the wrong settings or something or what. Might just have to have codex computer use fiddle with it to see if it can figure it out.

by dchuk

6/5/2026 at 4:46:14 PM

Hey Jeff, I did some research on the jetkvm after reading this as I was very impressed but wanted full scale hdmi + Poe and was going to pull the trigger on the clone you mentioned later, ArkKVM but felt like I’d rather support the main project if I could…

What I found seems to indicate that Jet fixed those two issues in a hardware revision but it’s really difficult to distinguish the new on from the old as they’ve seemingly kept the same name and not added a v2 or something like that to the naming. One of their vendors has a Poe va non poe sku, the other has a an emmc vs tf card sku. All seemingly without a name distinguishing them.

There’s also just chaos on Amazon as they are being sold in at least 4 separate listings with no name distinguishing which model is which, non of them mention poe and all claim full size hdmi.

In any case I thought you should know that your write up is out of date here but you probably need to do some digging to figure it out.

by Zenbit_UX

6/5/2026 at 7:07:14 PM

Indeed, I will add a note in my blog post. They should've called it V2 or something.

by geerlingguy

6/5/2026 at 9:03:34 PM

Surprised nobody mentioned Intel vPro AMT so far. It is basically an always-on KVM that's part of CPU firmware, powered by an always-on 5V PSU rail. There is a scary amount of options, including unattended periodic (or alarm based) phone home, user acceptance or full user override, boot media spoofing, Serial over WiFi... All built-in into consumer(-ish) CPUs.

by mstaoru

6/5/2026 at 10:58:29 PM

> All built-in into consumer(-ish) CPUs.

Dude, I wish. I run a large homelab filled with consumer and small business grade intel hardware, and would love to have vpro on all my mid-high end consumer intel platforms. I have the experience and network environment to lock it all down securely, and it's very reliable high performance low level access from before boot.

It's true that some number of relatively expensive consumer-grade CPUs support vPro, but the catch is it also requires the motherboard's chipset to support it, and it has to be both implemented and enabled in the BIOS.

You rarely if ever see consumer hardware with a chipset that supports it. On all the systems I have that fully support vpro from soup to nuts, you have to intentionally turn it on because it's quite dangerous in the wrong circumstances.

by xnyan

6/6/2026 at 7:25:15 AM

[dead]

by mstaoru

6/5/2026 at 9:25:44 PM

I'm not surprised that nobody noticed it at all. That's because it's not a KVM that you can purchase and test, the subject to the article.

Instead, you're just talking about IMPIjr. These specific features are not in consumer grade CPUs, but in CPUs marked for workstations. Ain't no consumer buying fuckin vPro machines. These are enterprise IT management features, not user features. They're also subject to frequent insane rants by people obsessed with them as possible privacy issues.

by McGlockenshire

6/6/2026 at 9:12:34 AM

> Ain't no consumer buying fuckin vPro machines.

Yeah, fine, but a lot of people have been snapping up the tiny/micro class PCs instead of overpriced Pis and a lot of them have vPro.

I shove https://github.com/Ylianst/MeshCommander into the AMT on any vPro boxes I manage so I can have an easy-to-use frontend right on the AMT.

by kotaKat

6/5/2026 at 4:38:34 PM

Not affiliated but I had good experience with GL.inet’s comet line [1]. They have one on kickstarter that’s the size of a google cast puck that uses purely usb-C. Though all my KVM do not have internet access (blocked at my gateway). I can only access it via tailscale externally.

[1] https://www.gl-inet.com/products/gl-rm1/

by syntaxing

6/6/2026 at 8:56:30 AM

Kind of surprised that when these devices are brought up nobody ever mentions the gear from Raritan [1] and the like. It may not have the same feature set but in terms of rock solid reliability they’ll sit happily in a rack for years without issues.

[1] https://www.raritan.com/products/kvm-serial/kvm-over-ip-swit...

by solareon

6/5/2026 at 3:48:18 PM

I have a mild distrust of some of the cheap IP KVMs. I don't think vendors are malicious, but I don't expect they get it right every time either.

Admittedly, I haven't looked at any open-sourced firmwares either which could have improved things.

I have found the Sispeed USB KVM very useful, the convenience is well worth the $50 it cost me. The UX isn't great but you don't really need it to be. It works (most of the time) via WebUSB for the keyboard mouse.

by ectoloph

6/5/2026 at 3:50:19 PM

Part of the problem is the absolute crap that most vendors throw on an AST2600 is even worse.

I will say iDRAC has been a lot more reliable for me, but the chance I'll ever buy a Dell server for home use is basically 0.

by xxpor

6/5/2026 at 4:01:09 PM

Always a fun adventure when you buy an old server motherboard to see what state of disarray the BMC is in. Or if you have to patch the license on older boards just to get into it. Usually I just ignore the BMC on any hardware more than 5 years old.

by geerlingguy

6/5/2026 at 5:21:36 PM

Have you played around with OpenBMC or any of the open-sourced BMC firmware alternatives?

ETA: specifically on older server/workstation boards instead of the stock firwmare

by mwpmaybe

6/5/2026 at 5:50:14 PM

I've been interested but the idea of SPI flasher recovery has always meant I've not bothered actually trying. Maybe I will finally on one of these old boards I have lying around..

by xxpor

6/5/2026 at 5:58:41 PM

Same here; trying to get OpenBMC flashed onto older motherboards can be a rabbit-hole. I generally throw an IP KVM on top if I really need remote control and can't settle on just SSH and a remote power cycle if that fails.

by geerlingguy

6/5/2026 at 5:25:20 PM

I went with Sipeed NanoKVM (PCIe) units across my homelab as well and I've also been happy with them. For a while it's been the best value option (not to mention the most consistently available option) cf. GL.iNet, PiKVM, and JetKVM. The PoE versions are great in a rack and the integrated ATX control is fully-featured (including the little power switch icon in the web UI turning green when the system is powered on). I set up an isolated OoBM VLAN with no Internet access and any switch ports assigned to it are isolated by default as well.

by mwpmaybe

6/6/2026 at 2:44:09 AM

I was looking into this and there were reports of e.g. connection delays making it impossible to access bios on a booting machine. This is a huge issue - rebooting and power management are big ip kvm use cases, and it isn't even touched on in the review.

I'm trying to make sense of this test. It seems like basically a listicle with "this is great" and a copy/paste of the datasheet specs. Most of the observations are things you'd spot instantly looking at it on amazon. The most critical comment is "it didn't work with ubuntu" (why, how, what went wrong). I was expecting a list of facets that were tested, with insight you can only get from having the hardware in front of you...

by rendaw

6/6/2026 at 5:59:50 AM

If you only have 1s to hit Del for BIOS it can be a problem, especially if you're powering the IP KVM off of the computer being controlled.

But otherwise, I've tested BIOS access on every one of these and it works on the PCs I've tested. Mounting ISO's can be tricky sometimes but mostly "just works" now.

by geerlingguy

6/5/2026 at 5:21:57 PM

Okay, there were two things that bothered me with these KVM switches: the power adapters are massive so there's too many cables, and the cables don't go always in the same side of the thing. Your post covers both and I'm thrilled. The final thing I recognize is a bit of a nice to have but the only thing that I want to rack that doesn't have a BMC is my Mac Mini which I've hesitated to put in the Sonnet RackMac and run because I don't know how to KVM power it on/off. My cabinet is an hour away from me and the Mac Mini runs the family AI agent so I need it to be available all the time. So far, it hasn't ever needed any attention (it comes back on after power outages at home) but I'd prefer to be able to turn it on/off remotely ideally.

Do you know which one of these works well with that?

by arjie

6/5/2026 at 5:34:01 PM

Could you get a kvm connected to a networked PDU with per-outlet control? Then a power cycle on the plug for the mac would accomplish the same thing. Or just use the network port on the PDU directly w/o kvm.

by bobson381

6/5/2026 at 5:56:55 PM

The annoying thing with Macs is they don't have the ability to 'Power on after clean shutdown and power cycle'. They can power on after a power fail, but that's not the same thing.

I want to be able to have power toggle on my Mac remotely, but without soldering in a jumper on the power button, AFAIK there's no way to do it :(

by geerlingguy

6/5/2026 at 6:12:57 PM

That is frustrating. Sounds like no way forward w/o basically forcing a crash via hard shutdown from a PDU.

by bobson381

6/6/2026 at 1:16:33 AM

They mentioned Gil’s Fingerbot. It’s literally a remote controlled “finger” that can be commanded to press your power button. Obviously, if your MacBook goes with you everyday rather than living on a rack, this isn’t a practical solution.

by brewdad

6/5/2026 at 6:44:26 PM

You're right. I just need to upgrade my PDU. But as you can imagine, I'm hesitating because I don't want to power down the rest of the hardware either.

by arjie

6/5/2026 at 5:38:23 PM

Add a PoE switch and PoE splitters for IP-KVMs that don't already have PoE-in?

by mwpmaybe

6/5/2026 at 5:42:49 PM

There are certainly edge cases where you want native USB and display, but after initial bring up, the device is on the network, and can be managed over the network.

So, sure, nerd out and add more hardware to your rack, but I need a physical keyboard and mouse attached to a machine in my rack like once per year.

by tcdent

6/5/2026 at 5:02:21 PM

It will never make sense to me why KVMs are such a hard problem to solve. It seems like something we should have a good answer for by now but we still really just don't without dropping hundreds of dollars, and even then it still feels like a crap shoot.

by ryanmcbride

6/5/2026 at 5:22:59 PM

It’s bizarre that one needs to do all this via a keyboard/monitor interface.

Nearly thirty years ago when I used to work on Silicon Graphics kit everything from powering on and off a server to installing the OS from scratch over the network could be done out of band via serial - and automatically, using expect(1)

That’s progress, I guess.

by blipvert

6/5/2026 at 5:54:56 PM

server ipmi includes serial over lan, which can work ... it's helpful if the console settings for early boot match the console settings for OS boot, and there's no standard for sharing them, so that's a bit of a mess... and then you have some where serial over lan drops out during boot, which is kind of terrible. :(

But, the devices here are geared towards people using consumer products as servers (which I do at home, not critizing), and serial console during early boot is not an option on those, and most boards don't even have a serial port anymore.

I will say, if you're presenting a usb keyboard, you might also be able to present usb storage which could be nice for booting off of.

by toast0

6/5/2026 at 9:30:56 PM

> serial console during early boot is not an option on those

But it should be. There's really no excuse for the current state of affairs. There ought to be a standardized low level API for all this stuff. One should never need to directly attach a keyboard, mouse, and monitor in order to provision a piece of hardware.

by fc417fc802

6/5/2026 at 8:10:15 PM

As other comments have indicated, this is basically solved for all servers. All Poweredges and supermicros have come with increasingly sophisticated integrated remote management systems for the past 20+ years. I have some R610s and their drac is old but still quite good all things considered.

by mrsilencedogood

6/5/2026 at 5:19:55 PM

They aren't a hard problem to solve. In the server market it's completely solved with a BMC. The problem being solved here is someone wants to make a product using some commodity product like a raspberry pi, perform video capture on a VGA/HMDI/DP port. This is not actually a problem end users have.

If you want to plug into a system that isn't server class, then they should be producing a video card that hooks into the USB bus, the always on rail of the power supply, the power switch pin of the power supply, and has an RJ45 jack. The contents of the card should be an off the shelf BMC chip.

But realistically if you want this kind of functionality, just buy server class systems that come with it.

by wang_li

6/6/2026 at 5:41:07 AM

I’m using GL.inet to support family on an old intel MacBook Air in Europe, from Asia. Best purchase ever. I set the quality to low so that the latency isn’t too bad. I basically want to be able to help them with reading email, using their bank’s website, and government services. I bought the MacBook Air as well (intel ones are dirt cheap), dedicated for this purpose - so the KVM and MBA are one fixed unit in a dedicated corner of a desk.

Only thing I wish I could find a remote solution for is scanning a QR code with their phone. Does anyone have any ideas for this?

by JSR_FDED

6/5/2026 at 4:33:57 PM

I have a CSE847 and HP DL380 G10 that have gone down for me due to power outages. Many of these look complex, and I basically just need remote power-on/toggle capability. Should I be looking at something else?

by chrisss395

6/5/2026 at 4:40:48 PM

You could configure BIOS/UEFI to power-on when power is restored (or return to last state). Or use wake-on-LAN, which quite a few consumer routers can send through their web interface.

by magicconch

6/5/2026 at 4:51:38 PM

Don't your servers already have BMCs supporting IPMI to provide full remote management? Often features like full KVM will require extra licensing, but remote power on is one of the most basic features and I've never encountered a BMC that didn't provide at least that much remote control.

by wtallis

6/5/2026 at 4:38:53 PM

Sounds like you might need a UPS/Battery backup for outages.

Some of those servers can have multiple power supplies for failover too. They also can have cards in them to power them on/off remotely as well as long as they have power.

by j45

6/5/2026 at 5:43:08 PM

All of these support a single computer only, so if your home lab has multiple PCs you need a remote control KVM switch too. And separately a remote control power strip/outlet if you need that also.

KVM switches are relatively cheap[^1] so I'm surprised there isn't an integrated solution.

[^1]: e.g. https://www.amazon.com/Computers-Switches-Supports-switching...

by js2

6/5/2026 at 5:54:45 PM

There are a few, like this add-on for PiKVM[1], a fully integrated version from Geekworm[2], and an as-yet unreleased 4-port IP KVM switcher from GL-iNet[3].

[1] https://technotim.com/posts/pikvm-at-scale/

[2] https://geekworm.com/products/pikvm-x680

[3] https://www.gl-inet.com/products/gl-rm4pe/

by geerlingguy

6/5/2026 at 6:43:44 PM

PiKVM themselves offer a 4-port switch, which can be chained five times, giving 20 ports in total: <https://docs.pikvm.org/switch/>

by teddyh

6/6/2026 at 12:20:50 AM

Neither the review or these comments talk about the USB drive feature. (did I miss it?)

Some(?) of the KVMs not only simulate a USB keyboard and mouse, but also a USB storage device.

This means you can remotely provide a boot image and the KVM will make a USB drive appear that the remote system can boot (and install from).

by m463

6/5/2026 at 5:33:18 PM

The JetKVM picture is aggravating to look at. It shows IPv4 address in large print and the IPv6 address in small print. That’s fine, but the IPv6 address is truncated with an ellipsis. How is that useful? A truncated IP address doesn’t work. Do the developers expect autocomplete for IP addresses? (And the IPv6 address is a ULA, so it could have been much shorter if SLAAC was involved in creating the address. Otherwise blame the DHCPv6 server I guess.)

by kccqzy

6/5/2026 at 5:01:31 PM

Glad I bought a JetKVM, it's been great (other than the HDMI adapter, lol)

by aappleby

6/5/2026 at 5:57:41 PM

Keep in mind you absolutely can DIY the PiKVM, it's supported in their docs. Buy the Pi, buy the extra hardware you may need for power splitting & video in, install PiKVM software (unfortunately it's a rather massive package of custom software), and it's probably around a hundred bucks cheaper than their cheapest product version.

by 0xbadcafebee

6/5/2026 at 4:27:28 PM

I deploy pikvm and I have been mostly happy. The tinypilot has a better feel to it. Something feels more polished.

by leetrout

6/5/2026 at 4:01:31 PM

How's the video quality/latency on all of these? RDP or parsec are probably the gold standard, but I doubt cheap arm SOCs can implement either properly.

by gruez

6/5/2026 at 4:08:06 PM

On some the latency is within 45-60ms (that's the best I've tested, under pretty strict LAN conditions), but average is more like 100-200ms. Not good enough for gaming, but fine for things like watching video, if you really want to do that.

Most employ heavy compression by default, and it looks a little more pronounced with motion. A few have 'high quality' mode, but especially on the Pi-based KVMs this eats up more CPU, so I don't use that.

It's on the whole best for use cases where you just need to log into remote servers and check on things, or reinstall/re-image something. I don't think I'd like using any of these for a constant remote session for daily work. I do use Screen Sharing on macOS for that sometimes, and it works great in its low-latency mode. None of the KVMs I've tested are quite to that level.

by geerlingguy

6/6/2026 at 2:32:57 AM

Anybody know which of these under $100 options can be reliably flashed with open source firmware?

by rao-v

6/6/2026 at 1:49:35 AM

Wait, so if one were to order a Sipeed NanoKVM there's a chance they could be visited by the FBI?

by UncleOxidant

6/5/2026 at 7:27:08 PM

The HP z2 mini g1a supports a BMC module that is a full redfish implementation, so it can do virtualmedia and UEFI configuration read/write.

https://www.hp.com/us-en/shop/pdp/hp-anyware-remote-system-c...

I was pretty disappointed to discover DGX spark has no BMC. I was able to hook it up to pikvm by connecting leads to the power switch wires. It honestly works really well and I can provision it with MAAS

Shout-out to pikvm for their redfish support with the pikvm switch

Great writeup there are quite a few here that are new to me

by moondev

6/6/2026 at 2:57:05 AM

All I want is an AST2500 directly on my motherboard

by manyatoms

6/6/2026 at 3:24:49 AM

The GL products are awesome. I have multiple.

by fuckinpuppers

6/5/2026 at 5:06:14 PM

Radxa also released their ipkvm product last week called radxa linkr. It costs by $55

by gainsurier

6/6/2026 at 12:48:55 PM

can you make one of these work with guacamole?

by senectus1

6/5/2026 at 4:58:18 PM

I'm running a PiKVM DIY on a pi02w. Adequate, but I'd like more functionality and performance.

I bought a SiPeed NanoKVM. It caught fire 15 minutes after being plugged in. Despite providing pictures of the charred PCB, they insisted I ship it back, costing me €20, and then tried 3 times during the transit to get AliExpress to void my return as fraudulent. I eventually provided proof of signed delivery to their people on the last possible day of my final appeal, and AliExpress ruled in my favor, refunding my purchase price but not the return shipping cost. Better some money back than none at all!

Maybe just buy the JetKVM. It looks nice!

by theodric

6/5/2026 at 4:00:14 PM

Another vote for JetKVM. Tailscale support is great. I'm glad to see audio is in the works because a Mac mini screaming from separate room during a remote session is disappointing.

by steele

6/6/2026 at 7:06:50 AM

[flagged]

by sikamikanikobg

6/5/2026 at 4:54:06 PM

[dead]

by farceSpherule

6/5/2026 at 4:54:15 PM

[flagged]

by UKPakiRapeParty

6/5/2026 at 4:58:42 PM

Created account just to post this ?

by leosanchez