alt.hn

12/27/2025 at 5:16:08 PM

Janet Jackson had the power to crash laptop computers (2022)

 https://devblogs.microsoft.com/oldnewthing/20220816-00/?p=106994

by montalbano

12/27/2025 at 5:56:37 PM

Very funny, reminds me of how Jennifer Lopez created Google Image Search when she wore a very deep cut green dress in 2000. So many people searched for "Jennifer Lopez Green Dress" that the search team realized they needed to include images in the search results. https://www.project-syndicate.org/magazine/google-european-c... https://www.thecut.com/2019/09/jennifer-lopez-walks-in-versa...

by knuckleheads

12/27/2025 at 11:37:20 PM

If this hadn’t been published in 2015, you’d all call it AI slop:

> When the German engineer Karl Benz invented the first petroleum-powered automobile, he did not just create an engine with wheels; he set in motion an industry that revolutionized the way society was structured.

by leobg

12/28/2025 at 12:16:06 AM

LLMs write like a high-schooler padding out an essay about something they only pretend to care about with vacuous adjectives and adverbs because that’s how most commercial writing reads.

by cjs_ac

12/28/2025 at 2:06:01 AM

Well, that's human slop, and it's actually more insidious than AI slop. You know what's weird? We've had this for almost twenty years. This human slop in writing this is the first time ever that this painful writing has been addressed by someone else on a comment on the internet. I've raised it so many times, but it's the first time I've ever seen one other person acknowledge it. Like, how crazy is that? Is the last twenty years been a fever dream?

by deIeted

12/28/2025 at 8:54:24 AM

I've seen a lot of comments discussing how recipe pages are filled with this sort of human slop. But not blog posts in general.

by bananaflag

12/28/2025 at 1:53:21 AM

Well sure, no one thinks LLMs invented bad writing, but they do copy the style.

by nkrisc

12/28/2025 at 10:03:32 PM

All he had to do to fix this was say "he drove forward" instead of set in motion. So close to a great simile.

by behringer

12/28/2025 at 3:49:40 AM

Not sure I agree. It's a fact.

by tomcam

12/27/2025 at 7:01:36 PM

https://everything2.com/title/7+hertz+-+the+resonant+frequen...

Example (for both functions):

    /* Emits a 7-Hz tone for 10 seconds.

      True story: 7 Hz is the resonant
      frequency of a chicken's skull cavity.
      This was determined empirically in
      Australia, where a new factory
      generating 7-Hz tones was located too
      close to a chicken ranch: When the
      factory started up, all the chickens
      died.

      Your PC may not be able to emit a 7-Hz tone. */

 #include 

   int main(void)
   {
     sound(7);
     delay(10000);
     nosound();
     return 0;
   }
from the comments over there (2002)

by tzury

12/27/2025 at 7:11:22 PM

Not very likely

https://skeptics.stackexchange.com/a/54400

by sandermvanvliet

12/27/2025 at 9:16:52 PM

I don't see how even an entire chicken is going to meaningfully respond to a wavelength of almost 50 meters. Their coop could though.

by maxbond

12/28/2025 at 12:25:09 AM

> I don't see how even an entire chicken is going to meaningfully respond to a wavelength of almost 50 meters.

Without disputing the conclusion, is the wavelength the right measurement, or should that be half the wavelength?

by thaumasiotes

12/28/2025 at 1:37:44 AM

That's a more natural way to consider the resonance, certainly. What I was getting at is that if we were using a 7hz tone to explore a big room, we couldn't tell if there was a chicken in there or not. We'd have a hard time sensing an elephant. Let alone exert enough of a force to harm. Because the wave is so much larger that they barely interact.

by maxbond

12/27/2025 at 8:27:39 PM

You're not generating a 7 hz tone on any sort of conventional audio gear, and definitely not a pc speaker.

by jasonwatkinspdx

12/27/2025 at 11:02:51 PM

The SVS PB-17 Ultra advertises a range of 12-220Hz at -3dB. I imagine it could play a pure 7Hz tone if you turn it up.

And most speakers can play infrasound for many non-sinusoidal waveforms [0]. They'll drop the fundamental and some lower-end harmonics but can still give a sense of what it sounds like

[0] https://szynalski.com/tone#7,saw,v0.5

by clolege

12/28/2025 at 1:07:34 AM

> I imagine it could play a pure 7Hz tone if you turn it up.

You're misunderstanding the numbers here. Going from 12 to 7 Hz is most of an octave, nearly doubling wavelengths.

Also SVS's numbers are gonna be the usual marketing stuff, so they're assuming a fat room gain curve, and just looking at their website they have a disclaimer on their graphs that it doesn't represent actual total output capability. Which is a way of hiding that if you actually try to drive it that hard that low with ~3kw electrical in those voice coils are going to torch.

The non lying way to prove that claim is to show large signal Kipple results including the heat soak. They ain't doin' that here.

Basically stuff going this low is really exotic and more in the realm of servos that simulate earthquakes than traditional transducers.

Tom Danley is the world expert on this sort of thing. He used to build stuff like ultrasonic levitation ovens and full scale sonic boom simulators for JPL/NASA.

In the audio world he was first famous as the tech lead behind ServoDrive. This now defunct company made special effects subwoofers using DC rotary servo motors to drive the diaphragm. They were used as special effects subs in that era by big acts like Garth Brooks. But they didn't catch on outside that niche because very little music has significant content below 40 hz as it just turns into a muddy rumble that harms sound quality as a whole. So to use these sorts of things you have to mix for it specifically. Cinema goes lower with the rumbles down to 15hz, but that's basically it.

Getting anything that's like a clean tone at 7hz is not gonna happen without a purpose built device.

FWIW Tom Danley started his own company[1] after Servo Drive failed on the business side, where he focuses on large scale horn speakers using novel topologies. They're among the best in the business at what they. Again, they don't have anything that even remotely tries to go down to 7hz.

[1]: https://www.danleysoundlabs.com/

Tom's a nice guy, I've traded emails with him a few times over the years. He used to be pretty active on the DIY speaker building mailing lists sharing his very in depth knowledge freely.

by jasonwatkinspdx

12/28/2025 at 1:54:03 AM

For context, the lowest notes on most pipe organs are typically about 33 or 16 Hz (from a pipe that is 8', 16', or 32' long).

by Jap2-0

12/28/2025 at 3:13:13 AM

If I feed a 7hz input to some cheap hand-made thing like https://www.youtube.com/watch?v=liSEwqdq7aA , will it not vibrate at 7hz and thus produce a 7hz "tone" (disregarding that humans won't perceive that as sound, at least not the fundamental)?

by zahlman

12/28/2025 at 4:19:31 AM

No, because reproducing the fundamental is the thing. Saying otherwise is kinda like me saying I'm gonna take a voice call, run it through a filter that generates a ton of distortion harmonics, then seperate out those distortion harmonics, and then call it a "tone" of your voice.

But also the original post was about a 7hz tone somehow resonating with a chicken's skull cavity, which if you know the basic wave equation relating wavelength with frequency is an absurdity. The waves involved are multiple orders of magnitude too big to couple to a volume that small. They'll just diffract around like nothing.

by jasonwatkinspdx

12/28/2025 at 4:22:55 PM

Who said the source has to stationary? Doppler shift for the win.

by tzs

12/28/2025 at 3:53:26 PM

You can with your hands, just shake them

by conradojordan

12/28/2025 at 3:52:29 PM

An easier way to generate a 7 Hz tone is to just move your hands back and forth 7 times a second. Either way you won't be able to hear because we can't hear 7 Hz anyway

by conradojordan

12/27/2025 at 8:52:48 PM

Reminds me of Gödel, Escher, Bach in which there is a phonograph dubbed "Record Player X", which destroys itself by playing a record titled I Cannot Be Played on Record Player X.

by OisinMoran

12/27/2025 at 7:18:14 PM

Just a small nitpick: the Tacoma Narrows bridge didn’t collapse because of resonance but because of flutter. It’s a common misconception.

For resonance the external driving force must match the resonance frequency of the system, but wind is rarely/never purely sinusoidal.

by elteto

12/27/2025 at 7:42:22 PM

The article covers this:

> Follow-up 2: Yes, I know that the Tacoma Narrows Bridge collapse was not the result of resonance, but I felt I had to drop the reference to forestall the “You forgot to mention the Tacoma Narrows Bridge!” comments.

by kelnos

12/27/2025 at 8:09:46 PM

Ask me how I know you didn’t read the whole article!

by forrestthewoods

12/27/2025 at 6:16:37 PM

https://youtu.be/tDacjrSCeq4 reminds me of this gem.

by yegle

12/27/2025 at 7:45:13 PM

So classic. For those weary of random links, it’s Cantrill and Gregg screaming at Thumpers and affecting IOPS.

That was such a great machine. We rearchitected our systems around it.

by neomantra

12/28/2025 at 11:34:50 AM

>it’s Cantrill and Gregg screaming at Thumpers and affecting IOPS.

For me, that is less meaningful and more random than a youtube link. I have absolutely no clue what you are talking about.

by ofalkaed

12/28/2025 at 1:44:53 PM

That is fair, particularly compared to Janet Jackson! I will add detail.

In their younger days, two distinguished engineers, Bryan Cantrill and Brendan Gregg, made this video where they scream at a data storage server nicknamed Thumper. Screaming at it has surprising results, which are observed with a novel software technology called dtrace.

The Sun Fire X4500 was a dense storage sever, 4U with 48 disks and insane IO performance and a newish filesystem called ZFS. The video is not only funny in content, it features technology and technologists that became very impactful, hence the classic tag.

---

I love the lore, so I'll drop more.

While our team previously used AFS (mainly for its great caching) and many storage servers, this hardware combined with its software allowed us to consolidate and manage and access data in new ways, alleviating many of our market data analysis problems.

We switched to NFS, which previously was not performant enough for us on other hw/sw architectures. While using NFS with the Thumpers and then Thors (X4540) was fantastic, eventually the data scales became hard again and we made a distributed immutable filesystem that looked like the Hadoop HDFS and Cassandra file systems, named after our favorite Klingon Worf (Write-Once Read-Frequently).

Interestingly, in 2025 both XTX [1] and HRT [2] open-sourced their distributed file systems which are pretty similar to it, using 2020's tech rather than 2000's. HRT's is based on Meta's Tectonic which is a spiritual successor to Cassandra.

I wrote about our parallel HFT networking journey once upon a time on HN. [3]

[1] https://www.xtxmarkets.com/tech/2025-ternfs/

[2] https://www.hudsonrivertrading.com/hrtbeat/distributed-files...

[3] https://news.ycombinator.com/item?id=31924784

by neomantra

12/28/2025 at 2:29:57 PM

It was your rather odd usage of "affecting" that caused my confusion, made me think IOPS was some new internet acronym and something which could be affected as one would affect continental to sound cultured. I would have gotten the general gist had you said "causing IOPS" or if I knew Thumpers or maybe if you had used the full names of Cantrill and Gregg but I am not sure if I would have made that connection. Thanks for the clarification and the absolutely bizarre and quite interesting construction, I enjoyed this a great deal.

Edit: I clearly just got derailed by my initial confusion, there was nothing weird about your usage.

by ofalkaed

12/28/2025 at 2:47:17 PM

I don't understand what you find odd about "affecting IOPS."

If someone does something that has an impact on IOPS, then it's sensible to say they (or what they're doing) are "affecting IOPS."

Screaming at the JBOD wasn't "causing" IOPS, so using that phrase would've been more confusing.

by rkomorn

12/28/2025 at 3:05:33 PM

Right, I covered that in my edit which I probably made as you were writing your post. It was just one of those situations where a small amount of confusion compounds until you have lost sight of reality.

by ofalkaed

12/28/2025 at 3:07:08 PM

Ah yep, definitely hadn't seen your edit. :) Sorry for the churn.

by rkomorn

12/28/2025 at 4:36:08 PM

All good, I thought your point was fair either way, considering my original point of being clear about a link. Plus a chance for storytelling. =)

by neomantra

12/27/2025 at 9:38:30 PM

random links to a youtu.be video? pray tell, what malware would be transmitted from youtube.com, owned by Alphabet?

by Natfan

12/27/2025 at 10:58:11 PM

It's not about privacy or malware, although those are important in life. Maybe I'm on Reddit too much, but I like knowing what will appear on the other end of a link.

I originally posted my own comment with link and prose, but then saw GP's comment which preceded mine by an hour, so I deleted mine. I didn't originally realize it was that same video because it didn't say so, but then I recognized the link hash. I want people to see that video, because it's so great, so I added context as a reply.

by neomantra

12/27/2025 at 11:04:58 PM

You could catch a bad case of algorithm poisoning if you're not careful

by shmeeed

12/28/2025 at 2:00:55 AM

Someone linked flesh simulator the other day and now my you tube is filled with some seriously weird stuff.

by yaur

12/28/2025 at 12:11:26 AM

The malware of "up next" that eats billions of hours a year lol

by corobo

12/28/2025 at 12:28:04 AM

Old man yells at the cloud.

by beAbU

12/27/2025 at 7:55:43 PM

according to this video [0] the frequency was 84.2. that-s not unplausible.

a known problem in cutting vinyl records are sudden bursts of high volume frequencies around 100 hz, that have the potential to make the needle skip with a normal amount of weight on the tone-arm.

-------

[0] https://www.youtube.com/watch?v=-y3RGeaxksY

by mstep

12/27/2025 at 8:22:37 PM

I remember reading that the bassline in LFO’s self titled broke the cutting needle when they were pressing it. Wonder if that had a similar explanation.

by lelandfe

12/27/2025 at 8:47:03 PM

For a F1 drive axle the critical resonance frequency is around 2400 rpm. That's why you need to turn it up fast at start over the safe 4000 rpm, and never go down.

Without the ECU you can easily break it by starting too slow

by rurban

12/28/2025 at 9:57:52 AM

Wouldn’t a multiple of the resonance frequency also be problematic then? Why doesn’t the axle disintegrate at 4800 rpm?

by w-m

12/28/2025 at 2:22:59 PM

Because that's way above the critical resonance frequency. 4000 - 25000 is safe

by rurban

12/27/2025 at 5:57:02 PM

Why didn't they mute the volume to see if it was the video or audio stream causing problems?

by GaryBluto

12/27/2025 at 6:07:24 PM

This is someone retelling a story they were told by a co-worker of an event over 20 years prior. It’s not surprising that he doesn’t go into the details of exactly what was tried, beyond the key parts of the story.

by wanderingstan

12/28/2025 at 10:30:31 PM

I won't repeat it here, but I posted What I saw as an insider. I think that not all of the facts were quite right. However, some of the overtones definitely are.

by theologic

12/27/2025 at 6:13:26 PM

Not an expert here, so I’m genuinely curious how could a video stream (edit: with muted audio stream) possibly cause another laptop in close proximity to crash?

by k3vinw

12/27/2025 at 6:21:01 PM

What is claimed in TFA is that the hard drive resonate frequency reacts to the Janet Jackson video in bad ways because that music video puts out music that interferes with what the hard drive expects.

TFA was lacking details so this is merely a retelling.

by firesteelrain

12/27/2025 at 6:47:02 PM

Obviously not the video but the accompanying audio track. Could also just be a made up apocryphal engineering story that never actually happened exactly as described. Engineering as a profession is chock full of them but they do tend to be memorable parables of things to keep in mind when working on a relevant piece of tech.

What is definitely well documented is Brendan Gregg’s related discovery of performance degradation in servers from vibration of sibling servers / clapping nearby that caused spinning disks to pause their heads.

by vlovich123

12/27/2025 at 6:23:29 PM

I doubt it could, but when you run into a problem that defies your understanding of reality, you might try out responses that also defy your understanding of reality, in the hopes you might gain the missing insight somewhere along the way, yeah?

by trehalose

12/27/2025 at 6:23:56 PM

Also not an expert, it would have to be EMI or maybe the bright light was causing LEDs on the nearby laptop to generate voltage. LEDs can poorly work in reverse.

by raisedbyninjas

12/27/2025 at 6:26:57 PM

If this is just a fiction novel world‑building question: The video pixels create a bitstream to bitbang the gpu bus into emitting a 2.4‑gigahertz EMF signal to exploit a flaw in the Wi‑Fi driver.

by geor9e

12/28/2025 at 9:36:52 AM

> And then they discovered something extremely weird: Playing the music video on one laptop caused a laptop sitting nearby to crash, even though that other laptop wasn’t playing the video!

That’s about the time I would have given up on the investigation and called in an exorcist.

by Gazoche

12/27/2025 at 7:37:58 PM

I've had a similar case before but for a much more boring reason: a certain YouTube video somehow triggered a spike in power draw and caused my Google Pixel to reset.

Google's response after looking at the crash dumps: "WAI, your battery is degraded" (IIRC my phone was less than 3 years old).

by bjackman

12/27/2025 at 8:54:54 PM

Could be; after ~3 years, my Samsung Galaxy S7 would reset if I tried to make a call with battery below ~20%. I immediately knew it was the battery, because I still remember noticing it as a kid on Nokia 3410 - calling would sometimes drop the battery indicator by one bar, which would come back moments after call ended. That's how I learned about internal resistance and how battery capacity is measured :).

As for fixes in software, it's either treating it as WAI, or secretly throttling down the phone, like Apple did, for which they got accused of planned obsolescence. Neither choice is good (though actually informing the users would go a long way).

by TeMPOraL

12/27/2025 at 7:31:52 PM

Extra points for people who avoid gratuitous clickbait

by thimkerbell

12/27/2025 at 8:00:26 PM

It wasn't exactly disappointing. I loved to read The Old New Thing back in the day, Raymond's blog was full of stuff like this.

by Kuraj

12/27/2025 at 7:32:05 PM

Weird. Digital recording and mastering was definitely a thing at that time. You’d think they would have been crashing the HDDs of PCs in the recording studios.

by brk

12/27/2025 at 7:34:19 PM

Not weird at all. This problem manifested only with some model of 5400RPM laptop hard drive (2.5"), but a recording studio would likely have been using 7200RPM 3.5" desktop drives. Different resonant frequencies, more sturdy mounting, more distance between the speakers and the hard drives.

by wtallis

12/27/2025 at 8:29:05 PM

Apparently pro tools came out in 1989, makes me think this may or may not be true. This article has some info about the mixture of analog and digital tools use to record:

> The main event was a brand-new mixing console called the Harrison Series 10, which was the first analog console to feature a digital control surface, with full automation of all parameters. Jimmy Jam and Terry Lewis were the first studio to have it, according to Jam. This meant that they could cut down the time it took to switch songs to about 10 minutes because complex mixes now required little-to-no cross-patching.

https://reverb.com/news/the-making-of-janet-jacksons-rhythm-...

by n8m8

12/27/2025 at 8:46:32 PM

They probably didn't use laptops in which the disk and the speaker are next to each other.

by sedatk

12/28/2025 at 6:17:59 AM

> And then they discovered something extremely weird: Playing the music video on one laptop caused a laptop sitting nearby to crash, even though that other laptop wasn’t playing the video!

Reality must have been falling apart for someone for a brief moment there.

by baobun

12/27/2025 at 6:44:37 PM

That’s a heck of debugging.

by ww520

12/27/2025 at 10:28:46 PM

This gives new meaning to Rhythm Nation.

by j45

12/28/2025 at 10:27:34 PM

The story is slightly unusual because I was actually managing a part of the engineering group at IBM that was integrating hard disk drives into ThinkPads during that era. I am not suggesting that it could not have happened or that it might have occurred at another major laptop manufacturer, but many details regarding the exact source and nature do not feel quite right. Music was a massive issue. It's just that it became an industry issue a little later as production moved to Taiwan and we were increasing our AD curve.

The issue of music crashing a hard disk drive was a genuine problem. Since I later specialized in hard drives, I can confirm that every manufacturer faced this issue as multimedia laptops became more common and we transitioned to higher areal densities. To state the obvious, we shrank the tracks every time to achieve larger capacities. We were doubling capacities every nine to twelve months when we first introduced MR, GMR, and PMR heads. The hard drive industry employs incredible control theory experts due to the requirement of keeping a head on track. Personal opinion, which I probably should research, but I believe that one of the densest concentrations of Ph.D.s in leading edge control theory could be found within the hard disk drive industry. Amazing things happen when you're trying to fly nanometers off the disc in a track that is maybe 100 nanometers wide at the time.

By 2010ish, as part of our development suite, we actually played music through the speakers to identify these types of issues. The origin of this practice actually came from the ODMs in Taiwan. Therefore, Janet Jackson was not the standard qualification song we used. Instead, it was popular hits from the Chinese pop market. There were also Western songs within the suite, but I remember our team blasting Chinese pop songs at full volume on multimedia laptops.

Laptop development began moving heavily to Taiwan in the mid nineties. By the time the early two thousands arrived, there was a massive amount of competence in Taiwan regarding chassis design engineering. As time progressed, every American PC company continued to outsource development to Taiwan and eventually to China. As development was outsourced, the ODMs would work with suppliers because we wanted to present solutions to the OEMs that were free of issues.

EDIT: By the way, it wasn't necessarily a blue-screen crash. I'm not saying that that couldn't happen, but generally what we did is we had the throughput test that we were run on the hard drives. Then we would go blast the music full bore and there were certain bandwidth requirements that we needed to get out of the hard disk drive. So to add some more details behind this, I would describe it as a performance issue and the blue screen issue was relatively minor. However, this was a number of years ago and I don't remember the exact percentages.

by theologic

12/27/2025 at 7:07:17 PM

That's Miss Jackson if you're Windows.

by jamesgill

12/27/2025 at 7:48:28 PM

I am not a huge fan of joke-y replies like this, but bravo. Perfect.

by monocularvision

12/27/2025 at 5:37:25 PM

Computers are so weird.

by etchalon

12/27/2025 at 6:43:03 PM

Analog devices pretending to be digital

by 01HNNWZ0MV43FF

12/28/2025 at 3:42:15 AM

reminds me of the captain crunch whistle and 2600

by modzu

12/27/2025 at 6:41:08 PM

I'd love to know whether that story is actually true.

Some dude hears somebody tell a story about sth 20 years ago, puts it in a blog, and here we are on HN, nobody questioning whether it's actually accurate. Of course Raymond Chen isn't just any random person, but the more important it would be to actually check? I mean, who hasn't heard people tell stories from decades ago, including colleagues reminiscing about the good old times "before y'all were born" only to realize later that it was vastly exaggerated or even outright made up.

Anybody around here with some actual first-hand info or at least another source besides this blog entry? I'd love to hear!

by teiferer

12/27/2025 at 6:46:45 PM

I believe it because it's a plausible variant of what I call the "Fus Ro Data Loss" vulnerability: shouting at hard drives causes them to resonate in a way that affects their ability to access data.

https://m.youtube.com/watch?v=tDacjrSCeq4

by bitwize

12/27/2025 at 7:27:33 PM

It's like Mark Twain and the rules for reselling a slave in Missouri https://medium.com/p/fe48ea07ad20 "the free black man in Missouri could only remain in the state for 6 months before being taken and put on auction as a slave." only it turned out to be false, and evidently made up by Twain for reasons of fiction.

by bryanrasmussen

12/28/2025 at 1:52:39 PM

There's a really good video here that shows that it likely happened. https://www.youtube.com/watch?v=-y3RGeaxksY Rhythm Nation is unique because it uses a nonstandard tuning that shifts the notes to less-used frequencies. The video creator found a paper that studied the resonant frequency of various 2.5 inch laptop hard drives, and found that it matched up with the frequency of the low E note used in Rhythm Nation.

by ndiddy

12/27/2025 at 7:06:10 PM

Never let the truth get in the way of a good story. That's my motto. Now let me tell you about the time that we dug up this dinosaur egg and hatched it.

by jacquesm

12/28/2025 at 10:32:00 PM

As somebody that actually had development experiences, both PC companies and in the hard drive industry, I posted an upper level post on this. I won't repeat it here, but an awful lot of this sounds apocryphal but some truth behind it.

by theologic

12/27/2025 at 7:05:55 PM

[dead]

by YouAreWRONGtoo

12/27/2025 at 5:41:47 PM

Another reason to step away from spinning rust.

Thank dog for SSDs

by nntwozz

12/27/2025 at 6:08:43 PM

Technically, that magnetic spinning HDD can work even after decades if maintained safely (no dust, no extreme heat) and without stress, even if it is not switched on for years.

In fact, if a magnetic HDD crashes, you may still recover some or all of the data by doing something hardcore, such as letting it sit for some hours in the freezer of your refrigerator, or immersing it in a bowl of rice overnight.

However, SSDs (and other flash storage devices) need to be switched on once in few months, otherwise there's a chance that some data stored in them may be permanently lost, as some cells may loose their power.

"As a reminder, an SSD's endurance rating is calculated based on how long it can store data if left unplugged after a certain amount of data has been written": https://www.tomshardware.com/pc-components/storage/unpowered...

by vee-kay

12/27/2025 at 7:25:01 PM

I feel like maybe you didn't understand the meaning of that last bit you quoted from Tom's Hardware. To be clear: the standard for consumer SSDs is 1 year of unpowered data retention after the drive's full write endurance rating has been exhausted.

The experiment Tom's is reporting on found twelve instances of data corruption on a low-end drive that had been subjected to over two thousand full drive writes, four times its rated write endurance, then left on a shelf for two years. This is a demonstration of a bottom of the barrel SSD wildly exceeding expectations.

It's really important in conversations like this to accurately convey not just the existence of the failure mode, but also the realistic chances of running into this problem, and the extent of the problem when it does manifest. If a deliberate torture test can only produce a few kilobytes of data corruption after twice the duration and four times the abuse the drive is supposed to be able to handle, this problem should be described as extremely minor.

by wtallis

12/28/2025 at 5:04:58 AM

> of a bottom of the barrel SSD wildly exceeding expectations.

I heard enough of stories of a bottom of the barrel SSDs wildly exceeding expectations by actually crashing with a partial or a full data loss waaay below their expected write endurance and while still powered on. Sure, these are the real bottom of the barrel, like Netac or KingSpec - but I won't expect any non-server grade SSD to retain data at all for any meaningful time.

by justsomehnguy

12/28/2025 at 4:36:38 AM

Bottom of the barrel flash drives..

Many of us have old cheap flash drives, which may have some backups (family photos, videos, career files, etc.) we may not want to lose - so they may qualify for such periodic basic maintenance (just plugging them into the PC once in 6 months or so).

I think most home users don't know this can be a potential problem for flash drive storage.

by vee-kay

12/27/2025 at 6:26:11 PM

HDDs also lose magnetic charge over time, about 1% per year. So you need to periodically spin up and rewrite the data every few years.

CD drives however, can store data indefinitely without needing refreshing.

by daymanstep

12/27/2025 at 6:37:11 PM

But the materials on the CD eventually break down, sometimes as soon as within 5 years. So you can look into MDisc, which purports 100 years…but only in theory since the tests are just approximations of what would actually happen.

by binarymax

12/27/2025 at 7:02:03 PM

Totally could be a defect in the lamination we don’t find out for years yet

by iwontberude

12/27/2025 at 7:41:48 PM

The important distinction here is that CD-ROMs can store data indefinitely, but CD-Rs and CD-RWs can not.

by jwitthuhn

12/27/2025 at 8:05:37 PM

BD-R and M-Disc CD and DVDs have archival storage life.

by kevin_thibedeau

12/27/2025 at 6:35:37 PM

CD-R media is of limited shelf life as well though

by aidenn0

12/28/2025 at 10:33:51 PM

As an industry insider, I have never heard the one percent. I'm not saying that it's not possible, but I don't recall ever hearing of us testing for it. So what is the source of the 1%?

by theologic

12/27/2025 at 7:00:49 PM

Having had drives which sat for many years and spun right back up without corruption makes me think 1% is too generous maybe 0.05% per year at most

by iwontberude

12/27/2025 at 7:13:04 PM

The claim you're responding to is that hard drives lose "magnetic charge" at a rate of 1% per year, not that bits get corrupted at a rate of 1% per year. The error correction in hard drives is far simpler and weaker than what's used in SSDs, but it does exist. So we should expect that there's a significant margin for data degradation before any observable data corruption begins. (This is true for SSDs, too; the first symptom of data degradation is reduced read performance as slower, more complex error correction methods kick in, then much later the host starts to actually get read errors or bad data.)

by wtallis

12/27/2025 at 7:21:04 PM

The magnetic strength of particles on the disk can decay at 1% per year, but the drive won't have issues reading them until they fall below a threshold where they can no longer be read. It could take decades.

by theandrewbailey

12/28/2025 at 4:41:54 AM

Magnetic HDDs also tend to have inbuilt SMART features to monitor disk performance and health, so they can inform when they are beginning to give problems. So the advanced user can recover the data before the HDD fully fails.

In my experience, flash drives tend to get problems suddenly leading to data corruption, and it may not be immediately apparent to the user till it is too late. I haven't such problems in recent years though, so maybe flash drives have become smarter too.

by vee-kay

12/27/2025 at 5:47:22 PM

Spinning rust may be defeated by Janet Jackson, but your chip storage is defeated by just sitting undisturbed in a drawer or a closet for too long...

by functionmouse

12/27/2025 at 10:24:09 PM

It's a reason not to use a hard drive from over 20 years ago.

But if you're stuck with hardware that old, an SSD isn't an option.

by Dylan16807

12/28/2025 at 12:14:59 AM

IDE SSDs have been a niche but readily-available product for as long as consumer SSDs have been mainstream. CompactFlash cards ensured that the necessary controller chips were available.

by wtallis

12/28/2025 at 12:40:47 AM

Okay I guess you can use a 4GB CompactFlash card that cost a thousand dollars at the time. (While a laptop hard drive could reach 100GB.)

by Dylan16807

12/27/2025 at 6:06:16 PM

Platters are not made of iron (or even steel) and neither is the surface, so I’m not sure why rust comes into the picture.

by mc32

12/27/2025 at 6:12:34 PM

The platters used to be coated with iron oxide as the magnetic coating.

Modern ones use more exotic materials.

by onraglanroad

12/27/2025 at 6:25:10 PM

Yes but that was like 40 years ago. I think by now the phraseology should reflect reality after about forty years.

by mc32

12/27/2025 at 7:15:33 PM

We still talk about "bugs" (99+% of computer defects in the past 70+ years have not been caused by insects) and "AJAX" (long after most of these requests use JSON instead of XML).

by theandrewbailey

12/27/2025 at 7:09:11 PM

How many horsepower does your car have?

by jacquesm

12/27/2025 at 7:33:13 PM

Ironically, I only started hearing the term being used in the past decade, as a colloquial alternative to solid-state storage.

by arcanemachiner

12/27/2025 at 7:24:16 PM

“Phraseology” is subtly different.

You mean “vocabulary”, “terminology”, possibly “nomenclature”.

by seanhandley

12/27/2025 at 5:45:21 PM

I love this story! Ha

by joeel84

12/27/2025 at 5:50:47 PM

> certain models

Why the weasel words? Does Raymond Chen not know which models? Or is it actually apocryphal.

by ninalanyon

12/27/2025 at 6:21:43 PM

> Yes, I know which “major computer manufacturer” it is, and no, I’m not telling. This is consistent with longstanding blog policy that companies are not identified in stories, because the point of the story to teach something, not to call out companies for derision.

From the follow-up post: https://devblogs.microsoft.com/oldnewthing/20220920-00/?p=10...

by Ysx

12/27/2025 at 7:38:33 PM

That's kind of a pathetic excuse, because it means that the "something" the story teaches is highly limited and there's nothing concrete for the reader to use as the basis for a deeper investigation.

by wtallis

12/27/2025 at 6:22:12 PM

He genuinely might not know. I worked on a similar incident when our video encoder caused about 30% of a pretty mainstream mobile handset to hard lock when recieving a stream, requiring the battery to be removed to reboot the device.

Neither us nor the OEM ever figured out why. They suspected that it was a weird combination of different bin combinations from different parts, but ultimately we had to change the method of delivering video to stop it happening.

by Mindwipe

12/27/2025 at 7:10:56 PM

The Dutch broadcasting service hired me to figure out why their homepage was crashing browsers. I turned out to be an animated GIF of two speakers that had an extra 0 interval frame in it which caused IE to crash... it doesn't take much.

by jacquesm

12/27/2025 at 5:58:00 PM

He might not since it comes via a friend. Or he's forgotten since.

Also seems not unreasonable for an employee like him not to specifically name and shame hardware partners. Maybe it'd all be fine, but I wouldn't blame him at all for not wanting to risk it.

by CamouflagedKiwi

12/27/2025 at 6:08:51 PM

In general, he never names companies in his posts if there is anything potentially negative in there.

by adzm