alt.hn

1/13/2025 at 11:25:08 PM

Webtop – Alpine,Ubuntu,Fedora,and Arch containers containing full desktop envs

 https://docs.linuxserver.io/images/docker-webtop/

by weitzj

1/14/2025 at 4:02:11 AM

I've been using the LSIO Webtop images for a few years. They're awesome for composable desktops that I run behind a VPN for a quick and easy dirty connection at home.

Combine the Webtop images by forcing it's traffic through the Gluetun [0] container and you're up and running. These Webtop containers are nice and snappy as well thanks to Kasm. Awesome OSS.

[0] https://github.com/qdm12/gluetun

by windexh8er

1/14/2025 at 10:54:08 AM

This is me being rather lazy admittedly, but do you have a compose/similar for connecting them by chance?

by Havoc

1/14/2025 at 2:55:15 PM

Basically the same, but a bit more complete in terms of the exposed config: https://pastebin.com/hPvs08qh

by windexh8er

1/15/2025 at 10:16:31 AM

Thank you!

by Havoc

1/14/2025 at 5:26:41 AM

Could one build off this to run the desktops on the local host's display? I.e. as an IoT device with a display and some custom UI?

by yonatan8070

1/14/2025 at 1:06:56 AM

> "Warning

Do not put this on the Internet if you do not know what you are doing.

By default this container has no authentication and the optional environment variables CUSTOM_USER and PASSWORD to enable basic http auth via the embedded NGINX server should only be used to locally secure the container from unwanted access on a local network. If exposing this to the Internet we recommend putting it behind a reverse proxy, such as SWAG, and ensuring a secure authentication solution is in place. From the web interface a terminal can be launched and it is configured for passwordless sudo, so anyone with access to it can install and run whatever they want along with probing your local network."

I hope everyone intrigued by this interesting and potentially very useful project takes heed of this warning.

by chrisweekly

1/14/2025 at 1:26:51 AM

That warning applies to anything you run locally. And going further, in this day and age, I would never put up any home service without it being behind Cloudflare Access or some form of wireguard tunnel.

by satertek

1/14/2025 at 6:33:38 AM

Just put up basic auth infront of your services and be done with it.

by Timber-6539

1/14/2025 at 8:35:02 AM

I've done that in the past, even for securing the admin pages of some software (there was once an issue where the admin page auth could be bypassed, this essentially adds another layer). With TLS it's okay for getting something up and running quickly.

Of course, for the things that matter a bit more, you can also run your own CA and do mTLS, even without any of the other fancy cloud services.

by KronisLV

1/14/2025 at 1:29:55 PM

After coming across a brief tutorial of mTLS in this tool for locking down access to my family photo sharing [0] I have bounced around the internet following various guides but haven't ended up with a pfx file that I can install in a browser. Can you recommend any resource to understand which keys sign what, and what a client certificate is verified against?

The guides I find often contain the openssl incantations with little explanation so I feel a bit like stumbling through the dark. I realize how much I've taken stacktraces for granted when this auth stuff is very "do or do not, there is no error"

[0] https://github.com/alangrainger/immich-public-proxy/blob/mai...

by jazzyjackson

1/14/2025 at 10:09:30 AM

the fact that we have to keep reinventing kerberos all the time because it doesn't speak http is starting to legitimately annoy me.

by baq

1/14/2025 at 11:56:13 AM

Firefox can be configured to use Kerberos for authentication (search for "Configuring Firefox to use Kerberos for SSO"); on Windows, Chrome is supposed to do so too by adding the domain as an intranet zone.

by rlkf

1/14/2025 at 12:40:25 PM

HTTP auth can work with kerberos.

Chrome, Firefox, Internet Explorer -- all support some form of kerberos auth in HTTP/HTTPS.

by j16sdiz

1/14/2025 at 12:52:44 PM

I mean, I'm aware of SPNEGO etc. It's just that it was... ignored(?) by the startups/the community/google? Whatever little support there is is comparatively a worse experience than what we've got now for no really good reason.

by baq

1/14/2025 at 4:02:56 PM

Kerberos is old neckbeard tech, highly complex to set up, with layers upon layers of legacy garbage. Trying to get it working is ... a nightmare, I prefer even the garbagefest that is Keycloak over dealing with Kerberos. At least that just requires somewhat working DNS and doesn't barf when encountering VPNs, split horizon DNS or split tunnels.

The only places I've seen a working Kerberos setup outside of homelabs is universities (who can just throw endless amounts of free student labor power onto solving any IT problem) and large governments and international megacorps.

by mschuster91

1/14/2025 at 4:00:52 PM

Good luck when the TCP or SSL stack has an issue. These bugs are rare but they do exist and you're getting fucked royally if your entire perimeter defense was a basic auth prompt.

Windows and Linux have both had their fair share of network stack bugs, OpenSSL had Heartbleed and a few other bugs, and hell you might even run into bugs in Apache or whatever other webserver you are using.

by mschuster91

1/14/2025 at 8:14:16 PM

It would have taken several days to heartbleed your private key in 2013 if you also added fail2ban. Your home lab probably isn't on the high priority target list.

by nurettin

1/15/2025 at 12:18:19 PM

> Your home lab probably isn't on the high priority target list.

Yeah but these days with botnets widely available to hire? Everything is fair game and whatever you run gets indexed on Shodan and whatever almost immediately. The game has never been easier for skiddies and other low-skill attackers, and mining cryptocoins or hosting VPN exit nodes makes even a homelab a juicy target.

My homelab for example sports four third-hand HP servers with a total of about 256GB RAM and 64 CPU cores on a 200/50 DSL link. That's more than enough horsepower to cause serious damage from.

by mschuster91

1/14/2025 at 6:13:54 AM

[dead]

by Melomomololo

1/14/2025 at 1:33:55 AM

Yeah, I made a mistake with my config. I had setup SWAG, with Authelia (i think?). Got password login working with 2fa. But my dumbass didn't realize I had left ports open. Logged in one day to find a terminal open with a message from someone who found my instance and got in. Called me stupid (I mean they're not wrong) and all kinds of things and deleted everything from my home drive to "teach me a lesson". Lesson painfully learnt.

But before that happened Webtop was amazing! I had Obsidian setup so I could have access on any computer. It felt great having "my" computer anywhere I went. The only reason I don't have it set up is because I made the mistake of closing my free teir oracle cloud thinking I could spin up a fresh new instance and since then I haven't been able to get the free teir again.

by hifikuno

1/14/2025 at 1:53:15 AM

> deleted everything from my home drive to "teach me a lesson". Lesson painfully learnt.

I had a mentor in my teenage year that was the same kind of person. To this day the only meaningful memory I have of him is that he was an asshole. You can teach a lesson and be empathetic towards people that make mistakes. You don't have to be an asshole.

by 7bit

1/14/2025 at 2:19:45 AM

The lessons we learn best are those which we are emotionally invested in and sometimes that emotion can be negative, but a lesson will be learned regardless.

by Dalewyn

1/16/2025 at 12:01:48 PM

LOL! That's why we still smack kids' hands with a stick if they answer a question in school wrong. Because it emotionally sticks and definitely does not cause any psychological issues.

by 7bit

1/14/2025 at 11:32:46 AM

Sure. But you don’t have to deliberately destroy all data and be mean about it as in GP‘s case to get an emotional reaction.

by ano-ther

1/14/2025 at 3:40:18 AM

> The only reason I don't have it set up is because I made the mistake of closing my free teir oracle cloud thinking I could spin up a fresh new instance and since then I haven't been able to get the free teir again.

People are automating the process of requesting new arm instances on free tier [1]. You would find it near impossible to compete without playing same game

[1] https://github.com/mohankumarpaluru/oracle-freetier-instance...

by elashri

1/14/2025 at 4:39:06 AM

Well, I know what I’m doing tomorrow when I get up.

by 7thpower

1/14/2025 at 8:28:15 PM

I had the same thing happen to me. I tried running a script for a month without luck (Sydney region). What did work was adding a credit card to upgrade to a paid account - no issues launching an instance, and it's still covered under the free tier.

by hrrsn

1/14/2025 at 6:06:53 AM

There are operations that put cryptominers into any unauthenticated remote desktops they can find. Ask me how I know... Way friendlier than wiping your data though.

by Maakuth

1/14/2025 at 9:29:16 AM

There are groups of people who hunt for writeable ftp servers to be used for random filesharing. At least this used to be a thing

by unixhero

1/14/2025 at 10:50:03 AM

> Lesson painfully learnt.

There are actually two lessons there:

1. Be careful what you open to the public internet, including testing to make sure you aren't accidentally leaving open defaults as they are.

2. Backups. Set them up, test them, make sure someone successfully gaining access to the source box(es) can't from there wipe all the backups.

by dspillett

1/14/2025 at 2:47:48 PM

An offline backup is incredibly inconvenient, but also very effective against shenanigans like these.

Also agree that backups should be "pulled" with no way to access them from the machine being backed up.

by doubled112

1/14/2025 at 6:20:11 PM

I use a soft-offline backup for most things: sources push to an intermediate, backups pull from the intermediate, neither source not backup can touch each other directly.

Automated testing for older snapshots is done by verifying checksums made at backup time, and for the latest by pushing fresh checksums from both ends to the middle for comparison (anything with a timestamp older than last backup that differs in checksum indicates an error on one side or the other, or perhaps the intermediate, that needs investigating, as does any file with a timestamp that differs more than the inter-backup gap, or something that unexpectedly doesn't exist in the backup).

I have a real offline backups for a few key bits of data (my main keepass file, encryption & auth details for the backup hosts & process as they don't want to exist in the main backup (that would create a potential hole in the source/backup separation), etc.).

by dspillett

1/14/2025 at 8:37:08 AM

But you can have Obsidian access from any device already if you easily setup syncing using the official method (and support the project by doing so) or one of the community plugins. Doing it this normal way avoids opening up a massive security hole too.

by nsteel

1/14/2025 at 1:38:44 PM

* any device you have admin rights to install software on, they are talking about being able to log in from any computer, not just their own

It surprises and annoys me that obsidian, logseq, etc don't have self hosted web front ends available. I think logseq will once they wrap up the db fork, and maybe someday we'll have nuclear fusion powerplants too.

by jazzyjackson

1/14/2025 at 10:53:52 PM

Ahhh that makes perfect sense, thank you. I'm so used to always having my phone this didn't even cross my mind.

by nsteel

1/14/2025 at 3:49:05 PM

No backups?

by jillyboel

1/14/2025 at 5:00:21 PM

I created personalized image with tailscale and kasmvnc for this particular reason, ... not on a public VPS. you can find images on my github as inspiration; do not directly copy unless you understand what you are doing.

by gbraad

1/14/2025 at 4:42:00 AM

Also note that their example docker config will allow anyone from the internet to connect, and even add a incoming rule in your host firewall to allow it. This is because they don't specify the port like -p 127.0.0.1:hostport:containerport (or the analog in the docker-compose config).

by fulafel

1/14/2025 at 2:02:48 PM

No they won’t. Octoprint (3d printing server) had a similar warning but they had to introduce actual user accounts to secure the system because people ignored it.

by asyx

1/14/2025 at 2:28:25 PM

If a good password is used HTTP basic auth is plenty secure over HTTPS so that everything is encrypted.

by macinjosh

1/14/2025 at 5:44:16 AM

We had an application that had quite the complex build process, and targeted only macOS and Linux. The mechanical engineers all used Windows, and needed to use the application. Rather than buying them macbooks or having them manage a Linux box, I wound up building something like Webtop with webvnc, and deployed containers to google cloud. Engineers could go to a URL and access the application, no need to download or install anything. It worked pretty well, all things considered.

by dymk

1/14/2025 at 7:08:46 AM

Since the website doesn’t have pictures or videos… Is “webtop” a way to package GUI desktop apps in a Docker container so that the only dependencies to run the app are Docker Desktop and a web browser?

by mch82

1/14/2025 at 7:46:17 AM

Yes. From the documentation there are some Screenshots and this is possible. Like starting a standalone Firefox browser inside docker desktop and accessing it via a browser vnc session.

But you get to control the keyboard/clipboard and it can add apparently watermarks to the vnc session for DLP functionality and you have a web http to take screenshots of your vnc sessions.

by weitzj

1/14/2025 at 10:22:42 AM

And, of course, I decided to see what happened if I fired up firefox in webtop and loaded webtop in it. Oops.

by mopoke

1/14/2025 at 11:35:59 AM

seems only natural, I sympathize

by Dansvidania

1/14/2025 at 11:54:09 AM

My pipedream is to have a containerized desktop environment like this that outputs directly to a physical monitor over HDMI/DP without needing an X server on the host machine. So far I haven't found any clear answers on whether that's possible at all.

by bo0tzz

1/14/2025 at 2:22:27 PM

I feel I've been nerdsniped or, some other term for your quest being contagious, I also now need to know if this is possible

I found a thread from someone who seems to know what they're talking about saying it's not going to happen "on your hardware", but doesn't mention what hardware might be required

https://forum.level1techs.com/t/can-intel-integrated-gpu-out...

Edit actually reading that link again it sounds like a USB adapter worked right away as a monitor for the VM and the OP is asking how to prevent this ! So seems you just need to enable GPU passthrough, and a USB HDMI will appear to your VM ? Will have to try this later today

by jazzyjackson

1/14/2025 at 7:10:04 AM

Kasm [1] also has ready-to-use images that work similar. They are also customizable to contain own applications or configuration. Intended to be used with their Kasm Workspaces solution, but they also work standalone just fine.

[1] https://hub.docker.com/u/kasmweb

by ctm92

1/14/2025 at 8:02:16 AM

Thanks for this, they have many images with an online working demo for 3 minutes to try it out. For sure I'm going to have another look at Kasm.

by NKosmatos

1/14/2025 at 8:28:35 AM

Their GitHub repo [1] has also skeleton dockerfiles that are annotated with comments on where you have to put your customizations, quite cool

[1] https://github.com/kasmtech/workspaces-images

by ctm92

1/14/2025 at 1:28:20 AM

Anyone have more info on this? Does it run systemd in those containers (I didn't see any systemd specific mounts).

This would be interesting to try out, as docker (via compose) is a bit easier to manage than - for example - VMs with virt-manager/cockpit-machines.

by mhitza

1/14/2025 at 3:31:05 AM

No systemd, these just start a shell script on init that launches the WM. They're based around the open-source component of this product: https://www.kasmweb.com/docs/latest/index.html

I find that they are slightly more sluggish than Moonlight/Sunshine for remote streaming, but generally faster/better than x11vnc. Not quite good enough for gaming yet, but plenty for web browsing, Blender, etc.

by r3c0nc1l3r

1/14/2025 at 9:12:12 AM

Back when I was in middle school in Israel the system used for communication between teachers students and parents was called Webtop. They actually went all the way to implement OS desktop experience in the browser (this is long long ago) it was very silly but cute

by iddan

1/14/2025 at 1:41:31 AM

Why did i have to find this at 3AM. Thanks though.

by fosron

1/14/2025 at 11:52:49 AM

What are some use cases for this?

by euph0ria

1/14/2025 at 3:13:04 PM

software testing. it's always software testing.

by hugs

1/14/2025 at 1:41:07 PM

How come Gnome is not there?

by Jnr

1/14/2025 at 6:50:51 PM

While I've never used GNOME inside a KasmVNC session, it used to feel slow on reasonably powerful machines in an Xrdp session.

That'd be my first guess.

by doubled112

1/14/2025 at 2:45:53 AM

Nice. Finally easy way to test them!!

by imran9m

1/14/2025 at 2:43:08 AM

I was just looking for something like this. Awesome!

by deelowe

1/14/2025 at 8:34:54 PM

What the heck is the webtop logo? Am I just dense? I can't make out what its supposed to be? Maybe a penguin somewhere in there, but... I dunno.

https://raw.githubusercontent.com/linuxserver/docker-templat...

by mcflubbins

1/15/2025 at 6:15:14 AM

Looks to me like an AI generated Firefox-ish logo with a Linux / Penguin motif to replace the Fox motif.

by BLKNSLVR

1/16/2025 at 3:19:27 AM

Are there any suggestions for something similar, but without the use case of access through a browser?

by adultSwim

1/14/2025 at 1:58:37 AM

[dead]

by curry798